Topic: How many people would buy the ShipDriver controller for EUR 199? (Discussion) (Read 11349 times)

maritiem · « **Reply #25 on:** September 14, 2008, 10:55:25 »

i would like to buy this one. looks much better than shipdriver. but unfortunatly it costs way too much money.

http://www.wilcopub.com/index.cfm?fuseaction=prod_scu
it's called ship control unit and it looks more professional than what shipdriver has too offer.

maritiem

Capt.Bluebeard · « **Reply #26 on:** September 14, 2008, 11:22:47 »

Depend of the price seems expensive out for a toy, mouse and keyboard are enough
TJK

Jayshum · « **Reply #27 on:** September 14, 2008, 11:26:10 »

Firstly, it's far too small. Secondly, it looks like a children's toy. Thirdly, it's far too expensive.

Ballast · « **Reply #28 on:** September 14, 2008, 11:45:15 »

At least it should have a usb connection instead of a serial connection

TerryRussell · « **Reply #29 on:** September 14, 2008, 14:28:42 »

Looking at that page, it only talks about Ship SIm 2006 being suitable.

And it says that the release date is "Winter 2006". No indication that it ever got released. The linked site at www.simw.com says it will be released November 2008, and if you click on the "Technical Info" link, it says "required: USB port" and nothing else. Total shambles, in my opinion.

An organisation that leaves it's sales adverts so out of date and poorly constructed would worry me too much to buy expensive products from it. Thumbs down, I'm afraid.

Ballast · « **Reply #30 on:** September 14, 2008, 14:43:04 »

Lol, the page that Maritiem provided says "TECHNICAL REQUIREMENTS: 1 free serial port"

TerryRussell · « **Reply #31 on:** September 14, 2008, 14:51:37 »

I'm not even sure that my PC has a serial port any more.

maritiem · « **Reply #32 on:** September 14, 2008, 16:38:16 »

Quote from: Ballast on September 14, 2008, 14:43:04

Lol, the page that Maritiem provided says "TECHNICAL REQUIREMENTS: 1 free serial port"

i don't even know what that is!

i'am not so good with computers.

maritiem

saltydog · « **Reply #33 on:** September 14, 2008, 17:50:15 »

Fortunately there are adapters of all kinds: here's one that goes from 15-pins to USB
It is meant to be able to connect older controllers to new computers..

Denis · « **Reply #34 on:** September 15, 2008, 08:48:25 »

I doubt such a hardware could be released today with a serial connection !

1. most PC don't have a serial port any more,
2. Serial devices aren't plug'n play.

The link maritiem sent is totally out of date. WilcoPub was working on this hardware two years ago, but they have abandonned it since (the page isn't available through Wilco web site). They don't build/sell any hardware.

eggy1991 · « **Reply #35 on:** January 25, 2009, 22:42:34 »

A short message, shipdriver will come out 10-februari of this year. the price is to be annouced.

Hope to tell you more soon.

Gr,
eggy1991

TerryRussell · « **Reply #36 on:** January 25, 2009, 22:48:42 »

Look forward to learning about it.

thanks.

Master Captain · « **Reply #37 on:** January 25, 2009, 23:41:57 »

yea it does look good http://www.raildriver.com/products/shipdriver.php (http://www.raildriver.com/products/shipdriver.php) hopefully someone from the forum will get it and can give us a great review

TerryRussell · « **Reply #38 on:** January 26, 2009, 01:05:32 »

I've just sent my wife an idea for my birthday....

Master Captain · « **Reply #39 on:** January 26, 2009, 02:10:35 »

Quote from: TerryRussell on January 26, 2009, 01:05:32

I've just sent my wife an idea for my birthday....

hehe, perfect you can review it for us all

Wande54 · « **Reply #40 on:** January 29, 2009, 10:03:26 »

I have decided to build 2 different but very simple controllers:
1 controller for "standard" ships with 2 slide-pot's for engine control, 2 slide pot's for thrusters and a rotary pot (270 degree) for the wheel.
1 controller for azimuth ships with 2 slide-pot's for engine control and 2 rotary pot's (360 degree) for azimuth control.
I may delete the thruster controls, because they are easy to control with the mouse.

I find it almost impossible to control the Bugsier 2 with keyboard and mouse.
Having the azimuth propellers in the front does not make it easier, compared with azimuth stern drives. $:-\$

Looking forward to the Shipsim 2010!!

Master Captain · « **Reply #41 on:** January 29, 2009, 16:12:24 »

sounds like a cool idea, hope it works out for you

RMSGreatBritain · « **Reply #42 on:** January 29, 2009, 18:56:10 »

Quote from: Wande54 on January 29, 2009, 10:03:26

I have decided to build 2 different but very simple controllers:
1 controller for "standard" ships with 2 slide-pot's for engine control, 2 slide pot's for thrusters and a rotary pot (270 degree) for the wheel.
1 controller for azimuth ships with 2 slide-pot's for engine control and 2 rotary pot's (360 degree) for azimuth control.
I may delete the thruster controls, because they are easy to control with the mouse.

I find it almost impossible to control the Bugsier 2 with keyboard and mouse.
Having the azimuth propellers in the front does not make it easier, compared with azimuth stern drives. $:-\$

Looking forward to the Shipsim 2010!!

Interesting idea, I like the sound of that

TerryRussell · « **Reply #43 on:** January 29, 2009, 20:22:54 »

I saw the ones that Vstep had at their presentation of the PRO version on Tuesday. Metal, multi-screens, real size ships wheel and throttle controls, etc.

I WANT!!!

Shipaddict · « **Reply #44 on:** January 29, 2009, 20:25:54 »

Quote from: TerryRussell on January 29, 2009, 20:22:54

I WANT!!!

Maybe if you are a good boy and do the hoovering for the wife

TerryRussell · « **Reply #45 on:** January 29, 2009, 20:27:30 »

I think that this would involve being nice to the Mother-in-Law as well. I can't see it would give me much change from 8,000 Dollars/Euro.

Kevinmcg_ships · « **Reply #46 on:** January 29, 2009, 21:04:09 »

Quote from: TerryRussell on January 29, 2009, 20:27:30

I think that this would involve being nice to the Mother-in-Law as well. I can't see it would give me much change from 8,000 Dollars/Euro.

I see someone has put a glass of what looks like a milkshake on top of the console.

Tsk tsk, what happens if someone knocks over the glass by accident?

Kev

TerryRussell · « **Reply #47 on:** January 29, 2009, 21:18:04 »

I hadn't noticed that. I guess it's all fairly "people proofed", though.

RMSGreatBritain · « **Reply #48 on:** January 29, 2009, 21:42:33 »

Quote from: TerryRussell on January 29, 2009, 20:22:54

I saw the ones that Vstep had at their presentation of the PRO version on Tuesday. Metal, multi-screens, real size ships wheel and throttle controls, etc.

I WANT!!!

Wow, how much |Id like to have one of those aswell! right next to my steering wheel and racing seat for PS3, and just by the 9 screen ultimate TV. Ooh, now thats a dream............

Ncena1 · « **Reply #49 on:** January 30, 2009, 10:45:13 »

We have now over 25million euro in our lotto jackpot

maybe... nah i dont think so

Author Topic: How many people would buy the ShipDriver controller for EUR 199? (Discussion) (Read 11349 times)

Capt.Bluebeard

TerryRussell

TerryRussell

TerryRussell

TerryRussell

TerryRussell

TerryRussell

TerryRussell