Topic: The forum environment project - Project stopped (Read 152607 times)

Joey1 · « **Reply #75 on:** February 19, 2011, 16:28:58 »

Right TFM

Don't forget to add me

Quote from: The Ferry Man on February 19, 2011, 16:26:57

List:
*TFM
*Joey

oceandream · « **Reply #76 on:** February 19, 2011, 16:58:05 »

Hello all
Sorry for this post
i know my home port is not in the poll
but i would love to see my home port of curacao in SSE
(repeat)

It's natural and very deep
entrance depth of the port is 254 meters, And the depth inside is between 60 and 100 meters
Allot of ships are capable of entering the port
But any ship higher then 52 meters cannot due to the juliana bridge wich is 55 meters high above sea level

Also we get allot of rare ship visitors
Most of them are cable layers, VLCC's, Or Warships
Big ship like 200 meter giant's are not allowed to go faster then 6 knots in the entrance or inside the port
Ships smaller then 200 meters have a max speed of 10 knots, Also tanker's and ships that do not manuaver easy must use tug's to enter this port
As for cruise ships more inside the port our outside at the pier

In the entrance the port has a pontoon bridge called "Emma Bridge"
she was build in 1888, she takes 5 minutes to open and close
My question " is ther any port in the world that has a pontoon bridge that can open?"

Please have a look at these foto's and get your impression

opinions are surely wanted

Kind Regards

Oceandream

Joey1 · « **Reply #77 on:** February 19, 2011, 17:05:27 »

Sorry oceandream we already decided which port we will model (Venice in Italy)

But that is a really nice port and if this project is successful there will probably a sequel.

Joey

Joey1 · « **Reply #78 on:** February 19, 2011, 17:37:03 »

I have also good news.

Started to model the main mesh of the environment. It's a bit difficult to do because of all the small canals.

Here you have a pic.

PS: I will create a new topic for all the files of the environment. So that everybody can go on with the modelling, if someting bad happens to me.

The Ferry King · « **Reply #79 on:** February 21, 2011, 15:25:24 »

how is this Joey?
i know it doesnt look like a venice building because i have never been to Venice..
but we could use it maybe..

Joey1 · « **Reply #80 on:** February 21, 2011, 15:39:53 »

Very nice TFK, some buildings in Venice nearly look the same.

One question where did you get thet nice texture from?

Joey

The Ferry King · « **Reply #81 on:** February 21, 2011, 15:41:20 »

i will PM you the texture

Joey1 · « **Reply #82 on:** February 21, 2011, 15:42:47 »

You don't need to PM it I am currently making a topic for all the files.

The Ferry King · « **Reply #83 on:** February 21, 2011, 15:45:17 »

oh i think i have accidently already send you the file..
you can include it in your new topic if you want

Joey1 · « **Reply #84 on:** February 21, 2011, 15:54:22 »

Now you can post all files in the files topic (http://80.95.161.114/shipsim/forum/index.php/topic,24156.0.html)

This are the rules:

Quote from: Joey1 on February 21, 2011, 15:45:43

Please upload the 3D files in Collada (.dae) format which can be easily exported for Google SketchUp or the most other 3D programs. For textures we will use JPEG (.jpg) first and in the end phase we will convert it to .dds!

Do not post anything else than your model and/or texture in this topic!

When you upload your model please put in here a screenshot or render, a short description and of course the model itself!

Kind Regards,
Joey

Joey1 · « **Reply #85 on:** February 21, 2011, 18:19:28 »

The first two buildings are finished - only a few hundred to go

Render...

The Ferry King · « **Reply #86 on:** February 21, 2011, 18:24:09 »

Quote from: Joey1 on February 21, 2011, 18:19:28

The first two buildings are finished - only a few hundred to go

Render...

few hundred!

The Ferry Man · « **Reply #87 on:** February 21, 2011, 18:24:54 »

mm this would be easier if I was remotely familiar with Venice

And the ferry berths are just concrete, so can't do them...

Hmm any suggestions for what I can do?

The Ferry King · « **Reply #88 on:** February 21, 2011, 18:35:10 »

you could make bridges that connect on the canal.
you could type that in google and you will get lots of images you could use.. because your good at railings so bridges would be fine..

Another thing you could do is go to Venice in Google Earth and look around for anything that might look easy to you

Joey1 · « **Reply #89 on:** February 21, 2011, 18:37:05 »

To get an overview of Venice I would suggest to look at it in Google Earth and don't forget to turn the 3d buildings on - the whole city is in 3d.

Then I would suggest a big building for you like the St Mark's Campanile (http://en.wikipedia.org/wiki/St_Mark%27s_Campanile)

Even the POR has seen it

http://www.faktaomfartyg.se/pride_of_rotterdam_2001_b_1.htm

The Ferry Man · « **Reply #90 on:** February 21, 2011, 18:37:57 »

Yeah, I was thinking about doing the bridges.

Quote from: The Ferry King on February 21, 2011, 18:35:10

you could make bridges that connect on the canal.
you could type that in google and you will get lots of images you could use.. because your good at railings so bridges would be fine..

Another thing you could do is go to Venice in Google Earth and look around for anything that might look easy to you

The Ferry King · « **Reply #91 on:** February 21, 2011, 18:43:35 »

Joey i managed to finish another building!

Joey1 · « **Reply #92 on:** February 21, 2011, 18:45:09 »

Quote from: The Ferry Man on February 21, 2011, 18:37:57

Yeah, I was thinking about doing the bridges.

If you would like to do a bridge, why not the most famous in Venice the Rialto Bridge (http://en.wikipedia.org/wiki/Rialto_Bridge)

Quote from: The Ferry King on February 21, 2011, 18:43:35

Joey i managed to finish another building!

Very nice TFK I have already seen it

Joey

The Ferry King · « **Reply #93 on:** February 21, 2011, 18:47:51 »

hmm shouldnt we let TFM start off with a simpler bridge so he kind of knows how to mkae other bridges

Edificio in Venezia, Italia bridge is quite easy

Or any other bridges because the bridge you showed is one of the hardest so let TFM start with an easier one

The Ferry King · « **Reply #94 on:** February 21, 2011, 18:59:57 »

*sorry for double post*

Joey i think i am starting to struggle now to make new buildings as they arent very detailed enough and i use the print screen option because i dont know where to get images..

But to make sure you udnerstand how i make my buildings:
I use this:
http://sketchup.google.com/3dwh/buildingmaker.html

Joey1 · « **Reply #95 on:** February 21, 2011, 19:05:09 »

That's a very cool tool

If you need some textures I will post some pictures but you have to edit them yourself.

Joey

The Ferry King · « **Reply #96 on:** February 21, 2011, 19:09:32 »

yes i am more than happy to help..
Can you post some of those texutres (or send) and i will have a look at it

The Ferry Man · « **Reply #97 on:** February 21, 2011, 19:11:02 »

Well - I can do the models, but someone else can texture mine - I am having a hard enough time with the CQs textures..

The Ferry King · « **Reply #98 on:** February 21, 2011, 19:12:31 »

hmm lets see those textures Joey.

TFM are you sure that Cq's texture problems are the same with building textures?

Shipaddict · « **Reply #99 on:** February 21, 2011, 19:33:15 »

If I remember correctly, doesn't the new version of Building Maker use the textures from Google Earth?

Poll

Which environment should we model?

Author Topic: The forum environment project - Project stopped (Read 152607 times)