Topic: Patch 1.3.5 (Read 51456 times)

maalle heitetty kippari · « **Reply #50 on:** March 10, 2011, 08:31:38 »

Quote from: J3nsen on March 10, 2011, 00:41:48

Mine is still on 1.2.2........

I have still on 1.1.0

BBGravesen · « **Reply #51 on:** March 10, 2011, 12:23:10 »

hi.

sems to be some errors widt patch 1.3.5
After instalition im missing a ship Sigita

BBGravesen

Ballast · « **Reply #52 on:** March 10, 2011, 12:24:25 »

That's strange, can you try to re-install the Sigita?

BBGravesen · « **Reply #53 on:** March 10, 2011, 12:43:47 »

hi.

Have done a komplet reinstalition update bonus typed the key to game to sigita but is still missing

BBGravesen

Ballast · « **Reply #54 on:** March 10, 2011, 12:52:56 »

Maybe a silly question, but did you used the seperate installer for the Sigita?

Krgjerde · « **Reply #55 on:** March 10, 2011, 14:41:12 »

Hi the steam update has not come

Matthew Brown · « **Reply #56 on:** March 10, 2011, 15:31:22 »

I suppose it's a good update.. but i'm still getting EXACTLY the same FPS as before $:-\$

Oh well, I'll be back at the airport if you need me

P.S. POR's new ramp door is brilliant but as I saw someone else say, the options for red eagle to do that just arent there.
And the cinematic cameras colored lines have gone.

ac_freeman · « **Reply #57 on:** March 10, 2011, 15:50:54 »

Do we have to keep stopping/restarting Steam to see if the update starts or will it start updating if it becomes available while Steam is already running?

thx,

Andy

Heikodewal · « **Reply #58 on:** March 10, 2011, 15:56:19 »

The colored guide lines for cinematographic camera are gone.

Can anyone tell me when the doors of the ferries work?

Edit: I already found out about the doors!!

voobrita · « **Reply #59 on:** March 10, 2011, 16:25:39 »

Please help me.....

Ballast · « **Reply #60 on:** March 10, 2011, 16:35:57 »

Before we can help you, could you please register your ShipSim Extremes serial key here on the forum in your profile?

Thanks!

voobrita · « **Reply #61 on:** March 10, 2011, 16:41:13 »

I'm sorry ,i do now.Thank you

Ballast · « **Reply #62 on:** March 10, 2011, 16:45:55 »

No problem. You now have acces to the technical support sub forum.

Can you please open a new topic there with your dxdiag, since this topic is for the patch in general.

Could you please supply your system specifications or dxdiag, this may help us to determine the problem.

Your dxdiag can be obtained by following these instructions:

Click Start > Run. type in dxdiag and press Enter. You may see a popup asking about WHQL drivers, click Yes/Ok to proceed.

In the window that appears, click the button that says Save All Information, when the Save Dialog box appears, save the file to your desktop. To upload the file here, click Additional Options underneath the reply area and choose Browse near Attach. Browse to your desktop, click the file and click Open.

* Windows Vista and 7 users need to press the Windows Key + R to access the Run prompt.

You can then post your reply with the file attached.

BBGravesen · « **Reply #63 on:** March 10, 2011, 17:50:22 »

hi.

The installer i used
Ship sim digital download from vstep
Bonus ship from vstep
patch 1.3.5 full

tryed all cant find Sigita after the patch 1.3.5 is installed no problems before installing the patch but after

BBGravesen

jibemorel · « **Reply #64 on:** March 10, 2011, 18:03:59 »

Quote from: BBGravesen on March 10, 2011, 17:50:22

hi.

The installer i used
Ship sim digital download from vstep
Bonus ship from vstep
patch 1.3.5 full

tryed all cant find Sigita after the patch 1.3.5 is installed no problems before installing the patch but after

BBGravesen

I did :
-SSE digital download version
-Patch 1.3.5 full
-Sigita

and it worked, then always install add-ons last.

Mslb_Eemshoorn · « **Reply #65 on:** March 10, 2011, 18:07:50 »

Is nobody else here missing the feature to switchoff the engine or am I wrong??

I hope still it comes in the next update...we will see...

Eemshoorn

Captain Best · « **Reply #66 on:** March 10, 2011, 18:08:10 »

Yeah same here, No Guages for the door gates on Red Eagle

oceandream · « **Reply #67 on:** March 10, 2011, 18:09:20 »

i think steam delayed the patch 1.3.5

saltydog · « **Reply #68 on:** March 10, 2011, 18:46:48 »

So far I have only tried out the Red Eagle..I can't get her moving forwards or backwards, only sideways..

Heikodewal · « **Reply #69 on:** March 10, 2011, 21:21:19 »

FPS went up a lot until...... I tried a mission I created with 2 whales. As soon as I gave the start command to the whales the FPS plunged from 18 to 3 fps. I created the mission last week and had no problems at all. Ofcourse the framerate dropped a little bit but not like this.

Edit: Heart from Marty that something changed in the behaviour of the whales, got it running again
Second thing I noticed: the rudder indicator of the Esperanza rhib works the wrong way. It indicates starboard when you turn to port and vv.
Third: The colore guides of the cinematographic camera are gone, they were very helpfull, now you have to guess what the max distance is.

Heiko

saltydog · « **Reply #70 on:** March 10, 2011, 22:21:21 »

Thanks eviss, it's confusing.. I wish they would just copy the 08Eagle in the game..

You're right, the reason for no movement was because the VSPs were driving in opposite directions..(see pic)
That means you can't go straight ahead or back with both props..
(1=bow prop driving you backwards, 2=aft prop driving you forward)

The Ferry Man · « **Reply #71 on:** March 10, 2011, 22:23:27 »

Quote from: saltydog on March 10, 2011, 22:21:21

Thanks eviss, it's confusing.. I wish they would just copy the 08Eagle in the game..
You're right, the reason for no movement was because the VSPs were driving in opposite directions..(see pic)
That means you can't go straight ahead or back with both props..

Oh dear... So only one VSP can be used when going forward, and the other for only when going "astern"?

That doesn't seem right...?

saltydog · « **Reply #72 on:** March 10, 2011, 22:25:57 »

It certainly isn't an improvement. Trouble is the steering isn't 360 degrees, as I think it should be on a VSP ship..
You can use the #1 to go forwards, but not straight ahead, only an angle

The Ferry Man · « **Reply #73 on:** March 10, 2011, 22:27:08 »

Quote from: saltydog on March 10, 2011, 22:25:57

It certainly isn't an improvement. Trouble is the steering isn't 360 degrees, as I think it should be on a VSP ship..

Poor Red Eagle... she gets worse...

RYAN123 · « **Reply #74 on:** March 10, 2011, 22:46:11 »

FINALLY I HAVE THE PATCH!! I can smile again now

Author Topic: Patch 1.3.5 (Read 51456 times)