Ship Simulator
English forum => Ship Simulator Extremes => Topic started by: oceandream on March 09, 2011, 14:21:59
-
Nice start for a new patch!!! >:( >:(
I cannot even acces the settings to decrease it!
EDIT: Problem fixed:
Please try and start your game again! There was a problem with a new RSS update that should be solved now. Happy sailing!
-
Nice start for a new patch!!! >:( >:(
I cannot even acces the settings to decrease it!
Hi oceandream,
I've sent you a private message to get some more details. Please reply and we'll find a solution.
- Swenson
-
Same problem :(
-
Nice start for a new patch!!! >:( >:(
I cannot even acces the settings to decrease it!
Same at me
Very slow starting, then crash :thumbdown: :thumbdown:
Aplause, aplause >:( >:(
-
Guys,
Don't throw in the towel at the first hurdle. Calm down, give us the details of the issue and I'm sure VSTEP will work on this issue.
Please understand, things don't always work as smooth as we would all like :)
-
You both also got a message with a request for more info.
- Swenson
-
You both also got a message with a request for more info.
- Swenson
Iam Trying a"clean"install at the Moment
-
Same here
-
Nice start for a new patch!!! >:( >:(
I cannot even acces the settings to decrease it!
Same here. :thumbdown:
-
OK Chaps...
Same here... :-\
I assume this patch has been checked before it was released, cause its a big bug to miss... :(
-
Please try and start your game again! There was a problem with a new RSS update that should be solved now. Happy sailing!
-
Yeah :2thumbs: - it works ;D ;D
-
Yeah works here too :)
-
It`s good now
Thanks
-
Great stuff! Thanks for your quick feedback! :2thumbs:
-
Am liking the improved PoR... :D
-
@Swenson:
Please try and start your game again! There was a problem with a new RSS update that should be solved now. Happy sailing!
Will a hotfix for this problem be released now?
-
Why would there be, it's fixed now! Please read the above. ;)
-
No need for that MokMok!
Have fun!
-
Am liking the improved PoR... :D
So am I. A nice taster for the ferry pack. Improved water at the bow and smoke look good too.
-
I got a graphic problem. My ships bow wakes, and my wakes as well as the watertrack behind me ships are flickering. One moment I see them and the next moment they are gone. I have done a clean install but didn't help.
Any suggestions??
-
Have you tried adjusting the graphics settings in game Snakebyte?
-
Hmm.. Weird that so many accoured this error.. Worked perfectly at first start for the new update :2thumbs: Well done, But the FPS seems to slowly decrease rather than increase :-\
-
Well if you only got the update after it was fixed, then you wouldn't have encountered the problem. Which was a minor hiccup, really. And fixed right away. :thumbs:
-
Upgrade works, and I got a better framerate now! Thanks!!
-
Have you tried adjusting the graphics settings in game Snakebyte?
Got it so far alony with the Pride of Rotterdam
-
I have the same problem with the flickering wakes, but as soon as I press tab it's gone.
Wired ???
-
I downloaded the update 1 PM /13 GMT
-
I am on STEAM but when i go into options it says that i have 1.3.0 mine hasnt upgraded :-\
-
It may take a little while for the Steam folks to go live with all of them, but they do have the patch and should update the Steam versions soon.
It also depends on what region you are in and such, it takes a little time.
-
New trouble
Both rudder over gamepad cross doesnt work right.
Only to Portside.
Tried all, fresh reinstall, new profile.
Nothing helps.
Singleplay and MP testet
gamepad works correkt with ss08
-
The Pirate says WHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOW.
Excuse me for screaming, but I'm so excited. In Rotterdam Cargo it was a Slideshow with a max of 4 FPS.
Now a HD Movie with about 12 FPS
Same in Dangerous Fire. From 4 FPS to a stunning 15 FPS
:2thumbs: to VSTEP :2thumbs:
-
Hallo,
Thats good to hear. I want to test it myself, but the patch is not available over Steam at this time.
So we have to wait ;)
-
i never downloaded V1.3 so i'm not sure if it's an issue within that, but when on the Red Eagle with the alternative cameras the locations are wrong, camera 1 is in the centre of the bridge and camera 2 is outside towards the stern.
Havn't found anything about this so not sure if it's a new issue with 1.3.5. Anyone else have this problem?
-
i never downloaded V1.3 so i'm not sure if it's an issue within that, but when on the Red Eagle with the alternative cameras the locations are wrong, camera 1 is in the centre of the bridge and camera 2 is outside towards the stern.
Havn't found anything about this so not sure if it's a new issue with 1.3.5. Anyone else have this problem?
I found this as well Ralphy. Also, when increasing throttle on forward unit, the thrust attempts to go into negative rpm's, which do nothing on a vs drive ferry. Don't really understand what they were trying to accomplish with this or if its just a bug. Obviously not tested prior to the release, again, or was and just allowed in anyways, oh well, at least they are trying I guess......
-
New trouble
Both rudder over gamepad cross doesnt work right.
Only to Portside.
Tried all, fresh reinstall, new profile.
Nothing helps.
Singleplay and MP testet
gamepad works correkt with ss08
You're not the only one, I have the same problem with my gamepad
-
You're not the only one, I have the same problem with my gamepad
Its not the gamepad.
Secondary control for rudder starbord and rudder 1+2 reset not works.
Curios at Bu2 turn rudder left to right.
Try second. Controls at keyboard.
Will also not work
-
Update is very well, better framerate etc. but i'm still missing the function to switch-off the engine >:(
Why?, is it to difficult to made it or is it something else problem??
Eemshoorn
-
When I want to make a picture of the ship, I only get the view on the bridge. Not the vessel from other viewing directions. My framerates have been drastically improved with this new patch, thanks for that!
-
Still have problems, I start the game, choose location, weather, vessel, but when I want to sail, the whole game crashed. Can someone help please?
-
works great!
Plus Side - PoR - loading door works
Down Side - Red Eagle - loading door/s do not work :doh:
-
Nice to see Red Eagle has thrust direction indicators. Trouble is you can only see them with your binoculars.
Also they don't go 360 degrees.. They look strangely similar to the meters on the left..
-
This patch makes the loading doors on POR work? :o
I hope i have this patch tommoz .. i still dont have it :/
-
Hello goodles,
The Red Eagle doors should work, I think, there is a dead band when manoeuvring the doors initially.
Regards,
Luc
-
Why don't I have the patch yet :'(
-
Hello goodles,
The Red Eagle doors should work, I think, there is a dead band when manoeuvring the doors initially.
Regards,
Luc
I don't have the controls, that section is blank :-\
hope it gets fixed
and as i said earlier
i never downloaded V1.3 so i'm not sure if it's an issue within that, but when on the Red Eagle with the alternative cameras the locations are wrong, camera 1 is in the centre of the bridge and camera 2 is outside towards the stern.
Havn't found anything about this so not sure if it's a new issue with 1.3.5. Anyone else have this problem?
-
What happened in berghaven?? Are the cats and jetties out for refit?? Take a look there is nowhere to moor!
-
I am on STEAM but when i go into options it says that i have 1.3.0 mine hasnt upgraded :-\
Mine is still on 1.2.2........ :lol:
-
Wow! Getting 400% improved framerate in the Tourist Tales campaign (the Rapid Suppliers mission)!!! not as much of an increase in all enviroments but there are improvements everywhere!
Thanks!!!
:thumbs:
-
Nice to see Red Eagle has thrust direction indicators. Trouble is you can only see them with your binoculars.
Also they don't go 360 degrees.. They look strangely similar to the meters on the left..
Voith Schneider Steering is 90 degree both sides, not 360 degree around.
Thats like reality.
http://www.voithturbo.com/545950.htm
-
Mine is still on 1.2.2........ :lol:
I have still on 1.1.0
-
hi.
sems to be some errors widt patch 1.3.5
After instalition im missing a ship Sigita
BBGravesen
-
That's strange, can you try to re-install the Sigita?
-
hi.
Have done a komplet reinstalition update bonus typed the key to game to sigita but is still missing
BBGravesen
-
Maybe a silly question, but did you used the seperate installer for the Sigita?
-
Hi the steam update has not come :'(
-
I suppose it's a good update.. but i'm still getting EXACTLY the same FPS as before :-\ :thumbdown:
Oh well, I'll be back at the airport if you need me :doh: :P
P.S. POR's new ramp door is brilliant but as I saw someone else say, the options for red eagle to do that just arent there.
And the cinematic cameras colored lines have gone.
-
Do we have to keep stopping/restarting Steam to see if the update starts or will it start updating if it becomes available while Steam is already running?
thx,
Andy
-
The colored guide lines for cinematographic camera are gone.
Can anyone tell me when the doors of the ferries work?
Edit: I already found out about the doors!!
-
Please help me.....
-
Before we can help you, could you please register your ShipSim Extremes serial key here on the forum in your profile?
Thanks! :)
-
I'm sorry ,i do now.Thank you
-
No problem. You now have acces to the technical support sub forum.
Can you please open a new topic there with your dxdiag, since this topic is for the patch in general.
Could you please supply your system specifications or dxdiag, this may help us to determine the problem.
Your dxdiag can be obtained by following these instructions:
Click Start > Run. type in dxdiag and press Enter. You may see a popup asking about WHQL drivers, click Yes/Ok to proceed.
In the window that appears, click the button that says Save All Information, when the Save Dialog box appears, save the file to your desktop. To upload the file here, click Additional Options underneath the reply area and choose Browse near Attach. Browse to your desktop, click the file and click Open.
* Windows Vista and 7 users need to press the Windows Key + R to access the Run prompt.
You can then post your reply with the file attached.
-
hi.
The installer i used
Ship sim digital download from vstep
Bonus ship from vstep
patch 1.3.5 full
tryed all cant find Sigita after the patch 1.3.5 is installed no problems before installing the patch but after
BBGravesen
-
hi.
The installer i used
Ship sim digital download from vstep
Bonus ship from vstep
patch 1.3.5 full
tryed all cant find Sigita after the patch 1.3.5 is installed no problems before installing the patch but after
BBGravesen
I did :
-SSE digital download version
-Patch 1.3.5 full
-Sigita
and it worked, then always install add-ons last.
-
Is nobody else here missing the feature to switchoff the engine or am I wrong?? :-[
I hope still it comes in the next update...we will see...
Eemshoorn
-
Yeah same here, No Guages for the door gates on Red Eagle :(
-
i think steam delayed the patch 1.3.5
-
So far I have only tried out the Red Eagle..I can't get her moving forwards or backwards, only sideways..
-
FPS went up a lot until...... I tried a mission I created with 2 whales. As soon as I gave the start command to the whales the FPS plunged from 18 to 3 fps. I created the mission last week and had no problems at all. Ofcourse the framerate dropped a little bit but not like this.
Edit: Heart from Marty that something changed in the behaviour of the whales, got it running again
Second thing I noticed: the rudder indicator of the Esperanza rhib works the wrong way. It indicates starboard when you turn to port and vv.
Third: The colore guides of the cinematographic camera are gone, they were very helpfull, now you have to guess what the max distance is.
Heiko
-
Thanks eviss, it's confusing.. I wish they would just copy the 08Eagle in the game.. ;D
You're right, the reason for no movement was because the VSPs were driving in opposite directions..(see pic)
That means you can't go straight ahead or back with both props..
(1=bow prop driving you backwards, 2=aft prop driving you forward)
-
Thanks eviss, it's confusing.. I wish they would just copy the 08Eagle in the game.. ;D
You're right, the reason for no movement was because the VSPs were driving in opposite directions..(see pic)
That means you can't go straight ahead or back with both props..
Oh dear... So only one VSP can be used when going forward, and the other for only when going "astern"?
That doesn't seem right...?
-
It certainly isn't an improvement. Trouble is the steering isn't 360 degrees, as I think it should be on a VSP ship..
You can use the #1 to go forwards, but not straight ahead, only an angle
-
It certainly isn't an improvement. Trouble is the steering isn't 360 degrees, as I think it should be on a VSP ship..
:(
Poor Red Eagle... she gets worse... :'(
-
FINALLY I HAVE THE PATCH!! I can smile again now ;D ;D ;D ;D ;D ;D ;D ;D
-
Hello All,
Only 1 engine on the RED EAGLE is working forward right now (think it is the engine 2) :doh:
Shut down the nr. 1 engine and you'll go forward ! ;D
Now you can use the nr 1 engine to slow down. I'm still trying / testing ! :-\
The picture with the indicators, that Luc showed before says it all ! 8)
http://80.95.161.114/shipsim/forum/index.php/topic,24584.msg325779.html#msg325779
Good luck , regards Erik
PS I have a surprise using the RED EAGLE ! ;D
Do NOT use the throttle now ::)
and stear max to the strb or port side ! :o
Watch what happens ! :evil:
-
I cannot enjoy SSE yet seeing Steam didn't put the 1.3.5 update on yet.
-
Eviss, I just did some testdriving, and in this setting Red Eagle goes straight ahead on both props.. :thumbs:
-
True, just simulated your situation ! :thumbs:
Luc has explained/stated, this setting to be the right one on the German forum. ;)
If that is so, the 2008 setting was not good and we need to train some more ! :doh:
Because this is a lot different to handle ! ;D
-
The bridge set up still isn't right, even if this is... :doh:
The SS08 is how it was laid out ;)
-
It just downloaded on Steam! - a bit late to give it a proper try but no crash and I was able to load a mission ok, so far so good :-)
Andy
-
It just downloaded on Steam for me too (Brazil). I have a problem with multiplayer; when i try to connect to a server, the game says that i need to register the game on the forum first...i'm almost pretty sure i did that some time ago before the patch...otherwise i couldn't post here, right ?
If i'm wrong, please tell me how to register...
-
You need to put your licences keys into your profile
-
:doh: :doh: :doh:
ok, it worked, thanks :blush:
why is it that on my posts it doesn't show these little shields/achievements ? Do i have to get a minimum number of rewards in the main campaign ?
Thanks for the very fast reply :2thumbs:
-
The shields are for SS08 :)
And no problem :thumbs:
-
I finally updated. I like the PoR's new animated door, but why doesn't the Red Eagle have it?
-
I only just noticed Red Eagle has a bell.. :)
-
Hi,
i've updated ship simulator extremes to 1.3.5 and now my controls are broken.
I have set 'left arrow' for rudder 1+2 to left and 'right arrow' rudder 1+2.
But when in the tow boat (2 rudders), left doesn't work so i can only steer to the right.
When on a big ship (1 rudder), right doesn;'t work so i can only steer to the left.
I tried resetting the controls but that doesn't seem to help.
Edit: The reset for rudder 1+2 is also broken
what to do?
gr Michel
-
Hi,
i've updated ship simulator extremes to 1.3.5 and now my controls are broken.
I have set 'left arrow' for rudder 1+2 to left and 'right arrow' rudder 1+2.
But when in the tow boat (2 rudders), left doesn't work so i can only steer to the right.
When on a big ship (1 rudder), right doesn;'t work so i can only steer to the left.
I tried resetting the controls but that doesn't seem to help.
Edit: The reset for rudder 1+2 is also broken
what to do?
gr Michel
Your Joystick an switch analog-digital?
Try switch and reset control settings.
But Rudder 1+2 will also not work.
-
As i typed, i already tried to reset settings.
I don't have a joystick, just using the keyboard. And it worked fine in 1.3.0
-
I only just noticed Red Eagle has a bell.. :)
Does it work ???
-
Hi,
i've updated ship simulator extremes to 1.3.5 and now my controls are broken.
I have set 'left arrow' for rudder 1+2 to left and 'right arrow' rudder 1+2.
But when in the tow boat (2 rudders), left doesn't work so i can only steer to the right.
When on a big ship (1 rudder), right doesn;'t work so i can only steer to the left.
I tried resetting the controls but that doesn't seem to help.
Edit: The reset for rudder 1+2 is also broken
what to do?
gr Michel
Same here.
Performance got better, but finally I hardly can believe the patches are tested very well. Steering issues are nothing really special concerning ships and it's finally not the first test version being released now! Normally I am very understanding but I'm beginning to feel pissed!
-
Does it work ???
Sadly no, it's just ornamental.. ;)
-
The performance has been drastically improved with the 1.3.5 Patch. But concerning other bugs, I think that SSE has been built upon a totally wrong codebase!
-
Sadly no, it's just ornamental.. ;)
I love my Eye-Candy :evil:
-
The performance has been drastically improved with the 1.3.5 Patch. But concerning other bugs, I think that SSE has been built upon a totally wrong codebase!
Mine is still the same - still about 8 FPS
-
Same here.. :-\
-
Likewise...Nothing on the performance side has appeared to improved for me :-\
-
I can get 10-12 in the bridge though :o
-
Yeah, my performance also improves whilst on the bridge, but as for being outside, and in any port, my FPS is terrible.
-
Why does my ship randomly start flying sometimes? :-\
-
V-STEP have invested in flight simulation :doh:
-
Flying ships, very strange!
-
i only encountered ships bouncing allot up and down in calm seas
-
Yeah, my performance also improves whilst on the bridge, but as for being outside, and in any port, my FPS is terrible.
Try closing the map/radar, that should give an improvement of about 5 FPS ;)
-
Try closing the map/radar, that should give an improvement of about 5 FPS ;)
but you NEED the map/Radar... :-\
-
I sailed all the way to Soton from Portsmouth with the Ocean Princess without chart.. ::)
-
I sailed all the way to Soton from Portsmouth with the Ocean Princess without chart.. ::)
You can't sail Dover-Calais without a chart... :P
-
TFM, you've been around long enough to know every environment inside out ;)
-
Hello goodles,
The Red Eagle doors should work, I think, there is a dead band when manoeuvring the doors initially.
Regards,
Luc
Ahoy Luc,
Are you sure that your pic isn't from the Red Eagle as she will appear in the Ferry Pack? Because mine is looking like on the attached pic's
Kind Regards
Aad
-
TFM, you've been around long enough to know every environment inside out ;)
:p
But how can I tell when I am mid-channel without a map? wioth no bouys, where is the Calais Approach Channel...
:doh:
-
:p
But how can I tell when I am mid-channel without a map? wioth no bouys, where is the Calais Approach Channel...
:doh:
Note down bearings and landmarks ;D
-
:p
But how can I tell when I am mid-channel without a map? wioth no bouys, where is the Calais Approach Channel...
:doh:
Like they did in the old days... dead reckoning.. :doh: You know the total distance, you know your speed, you know the time that you travelled and you know your course.. :doh:
-
Like they did in the old days... dead reckoning.. :doh: You know the total distance, you know your speed, you know the time that you travelled and you know your course.. :doh:
ooh...
That could be interesting then
-
It's simple math, not rocket science :lol:
-
I will have to have a go then... !:)
-
You guys only get 10-15 FPS? Jeez, and I complain when it reaches down to 20-26 :doh:
-
Hello Aad,
There is indeed a missing part on both consoles, and it is the panel to open the doors and the barriers.
This panel was not originally intended for this ferry, and the resource must lie somewhere else than in the patch 1.3.5, I have seen that you already discovered from where it comes, and certainly imagine why I wasn't aware it was missing. ::)
But it is lost (for me) somewhere deep in an anonymous file, and we will ask to the master of the scene to publish/distribute the resource in a next patch (or faster?).
Regards,
Luc
@ Captain Best, you are lucky what is your 1.3.5. pc like?
-
nooo... We have to wait until Patch 1.4? :'(
Thats going to be AGESSSSSSSSSSSSSSS :doh:
15?
Wow - if we get 15 we would be lucky...
12 max at the moment...
Although that WAS with everything maxed out...
-
Here's my Dxdiag ;) I got 23 FPS at Marseille with Agile and 29 at Ocean with Agile
-
I have just installed patch 1.3.5 and I am very happy with it! My FPS have massively improved, from 10-15 FPS to 30-40 FPS!
That has made a huge difference as I no longer suffer from headaches when playing SSE.
Well done to the team at Vstep :2thumbs: Thank you!
-
I have just installed patch 1.3.5 and I am very happy with it! My FPS have massively improved, from 10-15 FPS to 30-40 FPS!
That has made a huge difference as I no longer suffer from headaches when playing SSE.
Well done to the team at Vstep :2thumbs: Thank you!
With an I3 proessor????? Impressive...
-
Seriously though - How am I meant to enjoy it if every time I move the throttle lever my ship zooms off into the sky? :-\
-
Terrific job with the patch vstep :thumbs:
I now went from below 20 fps with bad AA and ai ship to an average of 25 with good AA and ai ships!
Now I'm really looking forward to drive the fast catamaran between Dover and Calais :D
-
Hello goodles,
The Red Eagle doors should work, I think, there is a dead band when manoeuvring the doors initially.
Regards,
Luc
sorry, mine looks nothing like tht and has not got the controls for the doors as you have showen in the game maybe this was in your beta test patch but not actuly published
here is what we get (and have had others report the same when i have asked them)
(http://farm6.static.flickr.com/5091/5522590922_448bb6db39.jpg)
-
It's the same for me as well - no panel control to open/close RED EAGLE's car deck doors.
(PRIDE OF ROTTERDAM's stern ramp works fine :thumbs:)
-
Try closing the map/radar, that should give an improvement of about 5 FPS ;)
I did that - and got no improvement at all.... :/
-
Hi TFM,
I also did the same - there is a slight improvement in environments like open sea (but nothing spectacular), but I've seen no improvement in heavy environments like Rotterdam.
-
Hi TFM,
I also did the same - there is a slight improvement in environments like open sea (but nothing spectacular), but I've seen no improvement in heavy environments like Rotterdam.
I tried in Dover - and got nothing...
I got a driver update which increased my FPS... by 1 FPS :doh:
I have reduced settings and now got my FPS up to 12-14 FPS :/
-
I have reduced settings and now got my FPS up to 12-14 FPS :/
To be honest I'm in the same situation as you in that respect...If I take my graphics settings down I still don't get particularly good performance, so whatever I do, I'm stuck really. I can't take it all the way down, because the game looks awful :C, and in exchange, I still don't get good performance :sleepy:
I also have a new problem now...since the update, for some reason, about 5 minutes into my game, the performance drops right down to the extent that it's no longer playable. I don't have a clue what's triggered this ???
-
Gentlemen,
If reducing your graphics settings does not increase your FPS, that is because your graphics system is not the major consumer of the time between frames. The time spent by the CPU in the computations necessary for ship dynamics, AI/Autopilot, little men wandering about, etc., is the cause of low FPS.
Marty
-
I have poor FPS of 6FPS and reducing the CPU from 85% to just 10% still doesnt work...
-
Depending on your CPU, it could be throttled down because of its temperature. You can check it with for instance CPU-Z or Real Temp (http://www.techpowerup.com/downloads/1872/Real-Temp-3.60.html) if the CPU is Intel. Cleaning the cooling fins or checking if it is firmly seated could help.
Regards,
Luc
-
Ever since the update I can't open a new window over SSE. (http://forums.ubi.com/images/smilies/compsmash.gif)
-
Please try and start your game again! There was a problem with a new RSS update that should be solved now. Happy sailing!
I've updated from 1.3.0 (working properly) but not working. I've reinstalled the originall 1.2.2 and updated to 1.3.5 and not working.
I attached dxdiag and crash info.
Regards
-
It's the same for me as well - no panel control to open/close RED EAGLE's car deck doors.
(PRIDE OF ROTTERDAM's stern ramp works fine :thumbs:)
Please read before complain:
http://80.95.161.114/shipsim/forum/index.php?topic=24584.msg326434#msg326434
-
Why are not the biggest bug in the game fixed >:(
If you run in high waves, like the Atlantic Ocean. and now comes the problem I kjøyrer in the highest waves I go under vanet but then it is up drum and the water can not get over >:(
-
Please read before complain:
http://80.95.161.114/shipsim/forum/index.php?topic=24584.msg326434#msg326434
FYI, it wasn't a complaint. All I wanted was to confirm with other users of this forum that I had the same problem as well.
I don't have all the bugs as reported by other users on this forum, for example RPA12 capsizing in the preview screen or PRIDE OF ROTTERDAM flying.
-
Why are not the biggest bug in the game fixed >:(
If you run in high waves, like the Atlantic Ocean. and now comes the problem I kjøyrer in the highest waves I go under vanet but then it is up drum and the water can not get over >:(
Good combination of norwegian and english :lol: , I kjørte in to the samme problem. :P
-
Good combination of norwegian and english :lol: , I kjørte in to the samme problem. :P
Haha yeah, I thought it looked hillarious :lol:. But I'll go ahead and correct it.
Why isn't the biggest bug in the game fixed yet?
If you sail into high waves, like the Atlantic Ocean, The ship goes underneath the water and stays there for a period ???and the water doesn't get over??
It was difficault translating it since I had problems myself reading it :P But it should be better I hope :S
-
I got the Steam version, is it a way to roll back to version 1.3.0.
The game was better before the patch, I can,t use separate rudder controls, when I redefine the keys, I can't turn left or reset if I use the rudder 1+2 command. I have reported it in technical.
-
For me the update was a great improvement!
Still some bugs (like ships committing suicide by bumping against at the quay wall and jumping away from it or the game crashing in some missions etc.) but at least I'm able to play the game now.
even if the frame rate isn't that high, it feels a lot more smooth - although still only one core is utilized.
It is a step in the right direction - I don't feel that it's a roll back.
I even look forward to the ferry pack - I didn't care for at all before the update.
-
For me the update was a great improvement!
Still some bugs (like ships committing suicide by bumping against at the quay wall and jumping away from it or the game crashing in some missions etc.) but at least I'm able to play the game now.
even if the frame rate isn't that high, it feels a lot more smooth - although still only one core is utilized.
It is a step in the right direction - I don't feel that it's a roll back.
I even look forward to the ferry pack - I didn't care for at all before the update.
I'm surprised to hear that only 1 core is still utilized, that should definitely be changed. The patch did make a huge improvement in my framerate though.
-
Thanks for fixing the analog controls! I use the Ship Driver controller, the old 1.3 patch made the throttle controls shaky whenever not set completely to maximum. They work perfect now with patch 1.3.5! :lol:
-
Hi Spitman, that´s somehow... funny ::)
My Ship driver and my ship console have now problems to find the zero-point. It´s now as if they stop reacting right when on 1-6 % away from the middle (on the way back to zero) and then I have to switch back to forward and back again to find a position where the machines go to zero. It´s also the same with the rudder.. (Of course I used all posibilities in Windows to set them correctly)
Hu,.. this patch really loves me :doh:
best wishes
Holger
-
It helps to assign keys to 'reset throttle' and 'reset rudder'.. :)
-
It helps to assign keys to 'reset throttle' and 'reset rudder'.. :)
Reset trottle Engine 1+2 is working
Not working is rudder 1+2 reset
-
I always assign N and B for Throttle reset and Rudder reset, try something like that :)
-
Rudder 1+2 reset could be in use by another key..Either change it or try Input 2.. :)
-
Still some bugs (like ships committing suicide by bumping against at the quay wall and jumping away from it
I think I have discovered why this is happening.
In free roam I was playing PRIDE OF ROTTERDAM in Port of Rotterdam to see what it's like lowering her stern ramp at the ferry terminal. All fine until I deployed one of her FRC to have a look around near the vessel. Next thing POR starts to bump agianst the pier and suffered damage. (she was tied up to the pier)
In another player mission I was playing AGILE SOLUTION and as I was approaching one of the waypoints to tie at a berth, there was another AI vessel going past VERY close. Next thing AGILE SOLUTION starts to shake like mad and suffered damage (while still tied to the pier).
So I'm thinking these two incidents are connected - the playable vessel just don't like other vessels passing very close to them, especially when tied up at a pier.
Anyone noticed similar problem as well?
-
Hmm apart from my controls problems i have some other things:
- Sometimes my ship just jumps out of the water and then bounces to rest again
- On the PoR i have flickering water graphics
(On Nvidia GTX260)
-
http://80.95.161.114/shipsim/forum/index.php/topic,24626.msg326265.html#msg326265
Hi miezel,
The flickering wake effects on POR are being attended to by the developers, as also is the bouncing ship effect.
Traddles
-
hmmmmmmm........ I have that problem also.. :-\ :-[Flickering waves etc...