Hello Guest November 26, 2024, 03:18:09 *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
Pages: [1]   Go Down

Author Topic: What in the blazes are the controls for?  (Read 2422 times)

RMS Canada

  • Forum member
  • Posts: 897
What in the blazes are the controls for?
« on: November 17, 2008, 17:58:40 »

I've downloaded and installed Jumbo Javelin but there are these controls (not the engine controls, steering, or bow thursters) that rotate and such but what are they for, anyway?  ???  Are they for the cranes or something else?
Logged
All ahead full!

IRI5HJ4CK

  • Forum member
  • Posts: 4256
Re: What in the blazes are the controls for?
« Reply #1 on: November 17, 2008, 18:01:41 »

That other control is an Azi Pod. It basically works on the same principal as it does on the Bugsier (Correct me if i'm wrong). And allows you to face what direction you would like to face before you start to go ahead, or astern.

Again, don't hold me to that.

Jack :)
Logged
Kind Regards,
Jack.

RMS Canada

  • Forum member
  • Posts: 897
Re: What in the blazes are the controls for?
« Reply #2 on: November 17, 2008, 18:03:15 »

That other control is an Azi Pod. It basically works on the same principal as it does on the Bugsier (Correct me if i'm wrong). And allows you to face what direction you would like to face before you start to go ahead, or astern.

Again, don't hold me to that.

Jack :)

So it's basically bow thrusters?
Logged
All ahead full!

IRI5HJ4CK

  • Forum member
  • Posts: 4256
Re: What in the blazes are the controls for?
« Reply #3 on: November 17, 2008, 18:06:29 »

So it's basically bow thrusters?

Well, I suppose, in a way, yes. But the Azi Pod is different, an Azi looks like this:



It just means that the prop can turn all the way around, allowing for more delicate manouvering.

Jack.
Logged
Kind Regards,
Jack.

RMS Canada

  • Forum member
  • Posts: 897
Re: What in the blazes are the controls for?
« Reply #4 on: November 17, 2008, 18:08:00 »

Well, I suppose, in a way, yes. But the Azi Pod is different, an Azi looks like this:



It just means that the prop can turn all the way around, allowing for more delicate manouvering.

Jack.

Wow! 
Logged
All ahead full!

mvsmith

  • Guest
Re: What in the blazes are the controls for?
« Reply #5 on: November 17, 2008, 18:21:52 »

On JJ it is not an Azipod, but a retractable, low power, azimuthing screw that is used for low speed maneuvering and dynamic positioning. It is located aft of amidships, near the after crane.
It is used in conjunction with the bow thruster to move crab-wise.
Logged

Nathan|C

  • Guest
Re: What in the blazes are the controls for?
« Reply #6 on: November 17, 2008, 19:56:54 »

Is it true that it isn't used in real? If so, what was the use of installing it...?
Logged

Person264

  • Forum member
  • Posts: 789
Re: What in the blazes are the controls for?
« Reply #7 on: November 17, 2008, 20:15:25 »

Somewhere else on the forum I think someone said it is for keeping the ship perfectly still whilst out at sea or something like that
Logged

TerryRussell

  • Guest
Re: What in the blazes are the controls for?
« Reply #8 on: November 17, 2008, 20:19:40 »

Is it true that it isn't used in real? If so, what was the use of installing it...?

No, that's not true.
Logged

Nathan|C

  • Guest
Re: What in the blazes are the controls for?
« Reply #9 on: November 18, 2008, 18:22:22 »

That's the post i was thinking of,

No, that's not true.
The azimuth control is indeed part of the DP2 system the ship is equipped with altough this is only used for offshore installation jobs and NOT during normal sailing and cargo operations. Therfore to get the best sailing experience don't use it !
Any questions about the ship or company feel free to ask or check    www.jumboship.nl (http://www.jumboship.nl)






Logged

TerryRussell

  • Guest
Re: What in the blazes are the controls for?
« Reply #10 on: November 18, 2008, 18:36:05 »

What he means (I believe) is that it isn't used while the vessel is in motion. You use it for manouvering purposes. A bit like not using a bow thruster above a few knots.

As it is a device that lowers beneath the vessel, to have it lowered while the vessel is "steaming ahead" would just waste fuel and risk damaging the unit, would it not?
Logged

mvsmith

  • Guest
Re: What in the blazes are the controls for?
« Reply #11 on: November 18, 2008, 18:45:50 »

It can be used in missions to bring JJ alongside the pontoon or dock to move cargo, although it might not be used in real because of depth limitations in harbors. But, because we don’t have dynamic positioning, it’s the only excuse we have to play with it.
Logged

RMS Canada

  • Forum member
  • Posts: 897
Re: What in the blazes are the controls for?
« Reply #12 on: November 20, 2008, 17:52:20 »

It can be used in missions to bring JJ alongside the pontoon or dock to move cargo, although it might not be used in real because of depth limitations in harbors. But, because we don’t have dynamic positioning, it’s the only excuse we have to play with it.

I'll try it out sometime in free-roam. 
Logged
All ahead full!
Pages: [1]   Go Up
 
 


SMF 2.0.14 | SMF © 2017, Simple Machines