Topic: "Berge stahl"project.Comments and Updates (Read 113001 times)

marcstrat · « **on:** April 27, 2007, 08:22:32 »

Al comments and updates,about this project here,please.

marcstrat · « **Reply #1 on:** April 30, 2007, 08:51:07 »

Greetings,
Goax75,has send me a mail,that he will start working again on this vessel very soon,he is a little occupide now with his job.
I hope this news is good news,for the game.
Regards
Marc

goax75 · « **Reply #2 on:** May 02, 2007, 01:42:36 »

Greetings, Mr Marcs, Yes I am back again !!!

and after few days, when I finish break-up I am ready to back, and finish this great boat!!!

See soon and best regards !!!!!

marcstrat · « **Reply #3 on:** May 02, 2007, 06:24:14 »

Quote from: goax75 on May 02, 2007, 01:42:36

Greetings, Mr Marcs, Yes I am back again !!! and after few days, when I finish break-up I am ready to back, and finish this great boat!!!

See soon and best regards !!!!!

Greetings Goax75,
O.K.and good to have you back than.I think this was a very nice project,everyone would like to see this vessel in the game.You did already a very nice job on this.
Regards
Marc

Ship Sim · « **Reply #4 on:** May 02, 2007, 20:16:36 »

Yes this is going to be a nice ship.

But hard to move in shallow harbors.

marcstrat · « **Reply #5 on:** May 02, 2007, 21:16:09 »

Quote from: Ship Sim on May 02, 2007, 20:16:36

Yes this is going to be a nice ship. But hard to move in shallow harbors.

Greetings,
This vessel discharge his cargo in Rotterdam(maasvlakte),he use tugs,so in that way it's a challenge to get this vessel to his mooringplace.
When we can go out at sea,with this vessel.You would be able to do an entired trip.
Regards
Marc

AriesDW · « **Reply #6 on:** May 03, 2007, 07:39:59 »

Yes, I am sure she will be quite a challenge when not out to see

marcstrat · « **Reply #7 on:** May 09, 2007, 07:49:04 »

Quote from: AriesDW on May 03, 2007, 07:39:59

Yes, I am sure she will be quite a challenge when not out to see

Greetings,
This is the whole idea,because there's not realy a "beginner"or"advanced"player.It's by chozing a vessel ,that you're able to make it difficult for yourself.
You can imagine,if you sail the small speedboat,that this is more easyer to moor,than this vessel"Berge Stahl"to get it docked in a proper way.
That why i wanted this huge vessel in the game.
Regards
Marc

AriesDW · « **Reply #8 on:** May 09, 2007, 16:48:32 »

True, but unless we get draught control in the game she cannot go many places in it . . . Because if her draught is too great, she hits the bottom of harbors pretty early on . . . . I think we need ballast control.

marcstrat · « **Reply #9 on:** May 09, 2007, 21:32:24 »

Quote from: AriesDW on May 09, 2007, 16:48:32

True, but unless we get draught control in the game she cannot go many places in it . . . Because if her draught is too great, she hits the bottom of harbors pretty early on . . . . I think we need ballast control.

Greetings,my friend
But this is where you know your job.
Believe me a veesl like this empty,needs ballast anyway.
Regards
Marc

AriesDW · « **Reply #10 on:** May 09, 2007, 22:19:07 »

True - she will need it regardless, but she cannot always be fully laiden. I think we need to see if we can find a way to control ballast or alter draft in the Ship Editor . . .

Thoughts?

Eemspoort · « **Reply #11 on:** May 13, 2007, 13:03:28 »

Hi all,

First of all, i'm new here.

I sail on an inland-ship for a living, so i know a few things here and there.

Offcourse it would be an idea to have Ballast-Controll on the Berge Stahl. However, what about adding scenery to the harbour of Rotterdam, so you will have the complete harbour, including the aproach?
So you can start your mission at Maasmond Aproach (i think it is), and lead the ship to it's destination?

Most importantly, we would need a nice set of tug-boats to get this massive baby in to place!

What a challenge, i'm really looking forward to it!

Oh well, i'm looking forward to everything in SS08!!

AriesDW · « **Reply #12 on:** May 14, 2007, 21:04:25 »

Welcome to the club Eems!

Eemspoort · « **Reply #13 on:** May 15, 2007, 13:50:00 »

Thx mate! I hope i can help with my little bit of experience here.

And offcourse to read all about the new version of ShipSimulator!

marcstrat · « **Reply #14 on:** May 16, 2007, 20:17:31 »

Quote from: Eemspoort on May 15, 2007, 13:50:00

Thx mate! I hope i can help with my little bit of experience here.
And offcourse to read all about the new version of ShipSimulator!

Greetings,
Yes,all help is welcome.
Regards
Marc

goax75 · « **Reply #15 on:** May 18, 2007, 03:03:10 »

Greatings Mr. Marcs & all shipsim people!!!!

Yes, like as promise, I am back to finish this giant ship.
Thereafter big timeout ( pause) by reason of my primary Job, I am ready to finish Berge Stahl. Parallel with
this boat, I am start to make NEW !!!! INLAND SELFPOPELLED VESSEL 2000 t. and few barges.

This is some a few NEW samples on Berge Stahl, and for few days when I finish Hull, and deck elements, I am ready to start making megastructures and enterior for this ship.

P.S
Mr Marcs, unless problem, I wish to contact you, by new mail for few days for little help on this ship.

If you no problem!!!! Essentially, necessarily some dimmension , and information for elemets and pards (deck fitting) like as: winch, anchor winch, command bridge, and other stuff.

Thanks !!!!!

Best regards !!!! and see soon with new samples

!!!!

Dejan Golubovic

marcstrat · « **Reply #16 on:** May 18, 2007, 05:34:09 »

Greetings Dejan,
Yes,mail me with your question,i will try to find the answers.
Regards
Marc

AriesDW · « **Reply #17 on:** May 18, 2007, 07:24:57 »

Wow - she is looking incredible!

goax75 · « **Reply #18 on:** June 14, 2007, 02:29:29 »

Greetings

ANCHOR WINCH IS FINISH!!!!

This is some render sampes anchor winch

goax75 · « **Reply #19 on:** June 14, 2007, 02:52:33 »

marcstrat · « **Reply #20 on:** June 14, 2007, 04:59:53 »

Greetings Dejan,
Glad to see you back on the forum,very nice updates,thanks
REgards
Marc

goax75 · « **Reply #21 on:** June 14, 2007, 09:08:18 »

No PROBLEM !!!!

For a few hours, I am Back with new samples,

I had an small (VISUAL detecting ) problem, but I have idea how to solve it. Actually the problem is i cant cleary see deck winch,and some particals, position on right side cutwater, ( true dimension ), But I have found great documentary movie about MS BERGE STAHL, so I have idea how to solve this probem.

Best regards!!!!

goax75 · « **Reply #22 on:** June 14, 2007, 22:02:26 »

HELLO !!!! Dear friends

I wish to present you, first DEMO renders of megastructures. Please tell me any yours ideia or sugestion !!!

Thanks and best regards !!!

This is all for to day, see tomorrow

J3nsen · « **Reply #23 on:** June 14, 2007, 23:09:49 »

Deam, omg!

Sick

marcstrat · « **Reply #24 on:** June 15, 2007, 06:02:07 »

Dejan,
Fantastic work,now you start to see how big this vessel is.
On this vessel everything is big! Exept the people.
REgards
Marc

Author Topic: "Berge stahl"project.Comments and Updates (Read 113001 times)

Ship Sim