Topic: Railworks 4 (Read 375821 times)

The Ferry Man · « **Reply #600 on:** November 12, 2011, 23:31:40 »

right click the ZIP folder and click "extract all"

Rbsanford · « **Reply #601 on:** November 12, 2011, 23:36:18 »

done! now wat?

The Ferry Man · « **Reply #602 on:** November 12, 2011, 23:36:47 »

What is in the new folder?

Rbsanford · « **Reply #603 on:** November 12, 2011, 23:42:49 »

i hav no idea. its an RWP file now, but theres nothing to open it with.

The Ferry Man · « **Reply #604 on:** November 12, 2011, 23:43:21 »

Open up RW and go to Package manager

Rbsanford · « **Reply #605 on:** November 13, 2011, 00:05:21 »

it worked! thanks for help guys!

The Ferry Man · « **Reply #606 on:** November 13, 2011, 00:37:45 »

Ahh good

No problem

clanky · « **Reply #607 on:** November 13, 2011, 08:12:31 »

@ Rbsanford, just for future reference, a ZIP file is a compressed file where some of the common information is removed to leave only the bits that you really need, what you did by extracting it is to change it back to the original file and size, otherwise known as unZIPing.

mvsmith · « **Reply #608 on:** November 15, 2011, 00:48:05 »

Quote from: Rbsanford on November 10, 2011, 05:07:38

annoying game crash while trying to play g-trax steam locomotives. any help?

FYI: Some steam engines will hang & crash RW3 when selected in a scenario if the tender is not properly attached.
The first two pictures show good & bad attachment for the Northern. Note that the brake hoses are not connected in the bad case.
The next two pictures show correct alignment for the Berkshire and the Consolidation. They will also hang RW3 if not connected.
Note that the brake pipes on Consolidation are not connected; perhaps the tender is borrowedâ€”as are the sounds and cab view.
Challenger and Big Boy will not hang RW3 if the tender is not connected. You can back up and couple to them in the scenario. Pictures show the correct alignment, and also the alignment for the articulated driver on Big Boy. Challenger also has articulated drivers that must be correctly attached.

mvsmith · « **Reply #609 on:** November 15, 2011, 00:50:38 »

Big Boy pics:

Rbsanford · « **Reply #610 on:** November 15, 2011, 02:18:12 »

Quote from: mvsmith on November 15, 2011, 00:48:05

FYI: Some steam engines will hang & crash RW3 when selected in a scenario if the tender is not properly attached.
The first two pictures show good & bad attachment for the Northern. Note that the brake hoses are not connected in the bad case.
The next two pictures show correct alignment for the Berkshire and the Consolidation. They will also hang RW3 if not connected.
Note that the brake pipes on Consolidation are not connected; perhaps the tender is borrowedâ€”as are the sounds and cab view.
Challenger and Big Boy will not hang RW3 if the tender is not connected. You can back up and couple to them in the scenario. Pictures show the correct alignment, and also the alignment for the articulated driver on Big Boy. Challenger also has articulated drivers that must be correctly attached.

you appear to hav been mistaken. wat i ment was that wen i try to play one, the engine (not the tender too) appears invisible. a few seconds afterward, i get a window saying "something bad happened too your program. would you like to save a diagnostic file?"

but i just debugged the computer, so ille try again and post wat happens.

Rbsanford · « **Reply #611 on:** November 24, 2011, 05:02:49 »

first pic: can i hav some more F7's? i dont think 7 is enough.

second pic: empire builder in the rockies!

edit: i still cant post big pics!

The Ferry Man · « **Reply #612 on:** December 08, 2011, 19:40:22 »

As a Christmas gift, RailSim are giving 50% off one piece of DLC of your choice

I got the Class 33...

It has... nautical ties

http://www.traintesting.com/IVA_88.htm

Rbsanford · « **Reply #613 on:** December 08, 2011, 19:56:40 »

i dont like british rail much, i think US railroads have it made.

The Ferry Man · « **Reply #614 on:** December 08, 2011, 20:05:22 »

Fair enough

Rbsanford · « **Reply #615 on:** December 08, 2011, 22:09:41 »

u know wat railworks really needs?

super chief cars. the F7 warbonnet requires them!

Captain Spencer · « **Reply #616 on:** December 09, 2011, 13:42:19 »

Quote from: Rbsanford on December 08, 2011, 19:56:40

i dont like british rail much, i think US railroads have it made.

Well that's your choice

I like the British railroads, especially the old rail networks, there are some fasinating lines up and down the country.

US railroads are an amazing feet on their own, due to it's size and locomotives

RYAN123 · « **Reply #617 on:** December 09, 2011, 16:43:16 »

im thinking of getting the class 325 with some off .... what do you all think?

Rbsanford · « **Reply #618 on:** December 09, 2011, 16:59:02 »

well i might try out the british ones...

anyone know any good routes with cables (i wanna do intercity swallow!)?

The Ferry Man · « **Reply #619 on:** December 09, 2011, 17:02:33 »

There is a good bundle at the moment - WCML with390 Pendolino and I beleive 325 - that might interest you

Rbsanford · « **Reply #620 on:** December 09, 2011, 17:04:39 »

thanks ile try it out.

The Ferry Man · « **Reply #621 on:** December 09, 2011, 17:05:16 »

You're welcome

The WCML is one of THE best routes there is

Rbsanford · « **Reply #622 on:** December 09, 2011, 17:08:08 »

wait... is WCML the one that starts in paddington (London)?

The Ferry Man · « **Reply #623 on:** December 09, 2011, 17:09:02 »

Mo

its Carlisle to Glasgow

Rbsanford · « **Reply #624 on:** December 09, 2011, 17:11:52 »

ooohhh scotland!

Poll

What Station Should I Go Next Time Im In Scarborough?

Author Topic: Railworks 4 (Read 375821 times)

mvsmith

mvsmith