Topic: Teaser (Read 59223 times)

mastermax10 · « **Reply #125 on:** June 07, 2013, 23:17:03 »

Quote from: danny on June 07, 2013, 22:39:47

So its something similar to a Gill Jet thruster? If it is a Jet-type thruster, you've still used the wrong controller

Also - And I'm probably going to draw a lot of flak for this - Given Vstep's track record when it comes to "trust" and "the truth" you can understand why some of us are a bit skeptical when it comes to trusting the things that Vstep or its representatives say...

But regardless of that fact, thank you for clearing up that issue regarding the thruster - now all you need to do is change the controller and everything will be grand! (Doesn't change the fact I'm unlikely to buy any of the upcoming DLC's, even if one of the new things is my favorite type of ship...)

Wel the thruster they used is the good one,, the ship i'm on right now has the same type for the same system, i can make a foto of it tomorrow

mastermax10 · « **Reply #126 on:** June 08, 2013, 09:41:51 »

Quote from: mastermax10 on June 07, 2013, 23:17:03

Wel the thruster they used is the good one,, the ship i'm on right now has the same type for the same system, i can make a foto of it tomorrow

The Ferry King · « **Reply #127 on:** June 08, 2013, 09:51:09 »

Quote from: Traddles on June 07, 2013, 10:47:26

http://80.95.161.114/shipsim/forum/index.php/topic,29172.msg385362.html#msg385362

Did you forget this post TFK? Mind you, seven months is a long time ago.

Oh boy, seven months have gone past so quickly!

Traddles · « **Reply #128 on:** June 08, 2013, 12:26:34 »

Hi mastermax10,
"danny" knows EVERYTHING about everything, even if it is proved to him he is wrong, he will always argue.

Angus.

Mr Robville · « **Reply #129 on:** June 08, 2013, 14:06:57 »

@Mastermax10,
Much appreciated!

I was hoping someone had a photo of it.

mastermax10 · « **Reply #130 on:** June 08, 2013, 17:57:40 »

Quote from: Traddles on June 08, 2013, 12:26:34

Hi mastermax10,
"danny" knows EVERYTHING about everything, even if it is proved to him he is wrong, he will always argue.

Angus.

Quote from: Mr Robville on June 08, 2013, 14:06:57

@Mastermax10,
Much appreciated! I was hoping someone had a photo of it.

JoMach · « **Reply #131 on:** June 08, 2013, 18:00:00 »

Quote from: mastermax10 on June 08, 2013, 09:41:51

hi thanks mastermax its aproxly the same as the azi controller that we use from vstep

jomach

saltydog · « **Reply #132 on:** June 08, 2013, 18:37:43 »

I am a bit surprised that all of the controls seem to be 'sideways'..

mastermax10 · « **Reply #133 on:** June 08, 2013, 21:48:11 »

Quote from: saltydog on June 08, 2013, 18:37:43

I am a bit surprised that all of the controls seem to be 'sideways'..

Full pull on the Rhine

Traddles · « **Reply #134 on:** June 08, 2013, 23:13:27 »

As I understand it the two pictures show:- Top- starb'd side of helmsmans seat & bottom- Port side of helmsmans seat. You can see the helmsmans left arm in the lower picture. Both pictures are looking forward towards the bow. The actual model of "Deo Favente" is so close to this it is quite remarkably realistic, even to the similar woodwork around the consoles. The only difference I see is that the thruster control is behind the main engine control whereas "Deo Favente" is the other way round. A question for you mastermax10. Does your vessel have twin screws? The main engine control would appear to show that she has.

Regards,
Angus.

wiqvist · « **Reply #135 on:** June 09, 2013, 17:00:13 »

Quote from: Traddles on June 08, 2013, 23:13:27

The actual model of "Deo Favente" is so close to this it is quite remarkably realistic...

Yes it is. Even the real one have a lot of dummies. All the buttons and meters, you can not do anything with.

Sorry Traddles, but I could not stay away from it.(And I am aware that not all person like and understand that sense of humor, but some does).

zilverenmist · « **Reply #136 on:** June 09, 2013, 21:42:41 »

Quote

A question for you mastermax10. Does your vessel have twin screws? The main engine control would appear to show that she has.

I gamble on 2 propellors , but evenso it could have double or single waterjet propulsion.
I hope mastermax10 will reveal the secret

mastermax10 · « **Reply #137 on:** June 09, 2013, 21:59:46 »

Quote from: Traddles on June 08, 2013, 23:13:27

As I understand it the two pictures show:- Top- starb'd side of helmsmans seat & bottom- Port side of helmsmans seat. You can see the helmsmans left arm in the lower picture. Both pictures are looking forward towards the bow. The actual model of "Deo Favente" is so close to this it is quite remarkably realistic, even to the similar woodwork around the consoles. The only difference I see is that the thruster control is behind the main engine control whereas "Deo Favente" is the other way round. A question for you mastermax10. Does your vessel have twin screws? The main engine control would appear to show that she has.

Regards,
Angus.

Yes its a twin screw,, if you like i can make more picture's tomorrow,
Here's some more information,, but its in Dutch :/ mayby you can translate it with google
http://www.shipphoto.nl/detailpagina.asp?land=%25&afbouwwerf=&langkleiner=&teugroter=&jaarkleiner=&cascostad=&zoekknop=zoek&jaargroter=&registernummer=&afbouwstad=&langgroter=&breedtekleiner=&rederijnaam=&eigendomfoto=%25&cascowerf=&naam=Dynamica&dieptegroter=&tongroter=&exnaam=&passagiersgroter=&passagierskleiner=&breedtegroter=&type=%25&dieptekleiner=&domicilie=&tonkleiner=&teukleiner=&fotoid=42092#

mastermax10 · « **Reply #138 on:** June 09, 2013, 22:09:36 »

Quote from: zilverenmist on June 09, 2013, 21:42:41

I gamble on 2 propellors , but evenso it could have double or single waterjet propulsion.
I hope mastermax10 will reveal the secret

wel of all the inland ships in Europe i can say it's about 99% Screw propulsion,,, and the bigger one's like where i'm working on (longest on the Rhine

) they only have screw's instead of Jet, the last years you see more of the Azimud propellors but the number of ships with that is limited.

zilverenmist · « **Reply #139 on:** June 10, 2013, 01:56:33 »

Quote from: mastermax10 on June 09, 2013, 22:09:36

wel of all the inland ships in Europe i can say it's about 99% Screw propulsion,,, and the bigger one's like where i'm working on (longest on the Rhine ) they only have screw, the last years you see more of the Azimud propellors but the number of ships with that is limited.

Quote from: mastermax10 on June 09, 2013, 21:59:46

Yes its a twin screw,, if you like i can make more picture's tomorrow,
Here's some more information,, but its in Dutch :/ mayby you can translate it with google
http://www.shipphoto.nl/detailpagina.asp?land=%25&afbouwwerf=&langkleiner=&teugroter=&jaarkleiner=&cascostad=&zoekknop=zoek&jaargroter=&registernummer=&afbouwstad=&langgroter=&breedtekleiner=&rederijnaam=&eigendomfoto=%25&cascowerf=&naam=Dynamica&dieptegroter=&tongroter=&exnaam=&passagiersgroter=&passagierskleiner=&breedtegroter=&type=%25&dieptekleiner=&domicilie=&tonkleiner=&teukleiner=&fotoid=42092#

This is a little confusing...

zilverenmist · « **Reply #140 on:** June 10, 2013, 02:15:05 »

The link is interesting. I understand why it has this flat square bow, the pictures gave the answer; These ships are in fact modified Hercules Atlas push boats, and the weled a barg to it to make it more economic.
Out of economic view and by its lenght a challenge to manouvre and sail with, but I do not like to give my opinion on its beauty, for I think it is plain ugly.

mastermax10 · « **Reply #141 on:** June 10, 2013, 11:25:56 »

Quote from: zilverenmist on June 10, 2013, 02:15:05

The link is interesting. I understand why it has this flat square bow, the pictures gave the answer; These ships are in fact modified Hercules Atlas push boats, and the weled a barg to it to make it more economic.
Out of economic view and by its lenght a challenge to manouvre and sail with, but I do not like to give my opinion on its beauty, for I think it is plain ugly.

you can say modified Hercules Atlas push boats,, but these are normal ships with 2e the power of most pushboats,
(the veerhaven and Hercules company's not, those are the only big pushboats on the Rhinedelta)

zilverenmist · « **Reply #142 on:** June 10, 2013, 13:23:30 »

but urm, http://80.95.161.114/shipsim/forum/index.php?topic=29172.msg391821#msg391821
1 or 2 props?

mastermax10 · « **Reply #143 on:** June 11, 2013, 19:41:24 »

Quote from: zilverenmist on June 10, 2013, 13:23:30

but urm, http://80.95.161.114/shipsim/forum/index.php?topic=29172.msg391821#msg391821
1 or 2 props?

2

Tug Hunter · « **Reply #144 on:** August 14, 2013, 13:37:28 »

Hello All,,

if some have an idea when the new teaser is comming out?? is already half of August and still no new updates and ships are arrived.

boatsimrocks25 · « **Reply #145 on:** August 14, 2013, 16:31:19 »

my guess is that Vstep is waiting till the day that SSE was released to the public on August 27th 2010. Or they have to delay it due to Nvidia screwing up there latest driver which broke the ocean system and lots of other games.
So probably 8/27/2013 I hope.

Can't wait to see what map Oceana will be sent to on the multiplayer servers. Now that her static multiplayer bug is fixed. I'm gonna take a guess and say either Dover or Marseille. But remembering that Dover (is) big enough to support maybe..four Oceana's but Calais on the other hand about only two. So where Oceana gets placed should be very interesting. Oceana Ftw!

Swenson · « **Reply #146 on:** August 29, 2013, 12:33:04 »

Sneak Preview 3!
http://www.youtube.com/watch?v=MLOHh2OtMNg

Rbsanford · « **Reply #147 on:** August 29, 2013, 15:35:52 »

Lovely!

larsdehaan · « **Reply #148 on:** August 29, 2013, 16:27:48 »

The moment you realise V-Step awnsers more Game related questions of facebook then on their forum..

Kevinmcg_ships · « **Reply #149 on:** August 29, 2013, 18:39:21 »

Quote from: Swenson on August 29, 2013, 12:33:04

Sneak Preview 3!
http://www.youtube.com/watch?v=MLOHh2OtMNg

That looks like the wee workboat from SS2006........

Author Topic: Teaser (Read 59223 times)

larsdehaan