Topic: Help, Urgent! I Broke my computer! (Read 12192 times)

dexter7 · « **on:** December 31, 2011, 19:22:03 »

I was messing around in the AMD VISION Engine Control Center And my Computer just immediately shut down, I tried to start it in safe mode to fix what I have done but then I can't access the AMD VISION Engine Control Center!

Please help!

Ralphy · « **Reply #1 on:** December 31, 2011, 19:26:19 »

what were you doing in the vision center?

changing the clock of the graphics card or CPU?

dexter7 · « **Reply #2 on:** December 31, 2011, 19:28:34 »

I think I was in the graphics... I hope I didn't break it! I'm pretty sure I didn't because it was fine at the speed for quite a while!

Ralphy · « **Reply #3 on:** December 31, 2011, 19:29:53 »

so can you start the pc normally?

VirtualSkipper · « **Reply #4 on:** December 31, 2011, 19:32:22 »

Quote from: dexter7 on December 31, 2011, 19:28:34

I think I was in the graphics... I hope I didn't break it! I'm pretty sure I didn't because it was fine at the speed for quite a while!

Maybe you should take a look inside your PC (by opening the case). $:-\$

Ralphy · « **Reply #5 on:** December 31, 2011, 19:33:44 »

but that won't tell him alot...unless there are giant black marks on his Graphics card

dexter7 · « **Reply #6 on:** December 31, 2011, 19:35:30 »

Quote from: Ralphy on December 31, 2011, 19:29:53

so can you start the pc normally?

No, I can't, it shuts off immediately after showint the desktop screen..

Quote from: VirtualSkipper on December 31, 2011, 19:32:22

Maybe you should take a look inside your PC (by opening the case). $:-\$

My mum won't let me for some reason...

Quote from: Ralphy on December 31, 2011, 19:33:44

but that won't tell him alot...unless there are giant black marks on his Graphics card

And I hear the GPU running.

Ralphy · « **Reply #7 on:** December 31, 2011, 19:38:07 »

So you can start it in safe mode without any problems you just can't get into CCC on that?

dexter7 · « **Reply #8 on:** December 31, 2011, 19:41:48 »

No... I can't do much now, I'm on my laptop now.

Ralphy · « **Reply #9 on:** December 31, 2011, 19:45:59 »

Does your motherboard have an onboard video chip? If so try booting using that

dexter7 · « **Reply #10 on:** December 31, 2011, 19:48:54 »

It's a Nvidia chip... $:-\$ Will that work?
Also, How do I start with an on board chip?

Ralphy · « **Reply #11 on:** December 31, 2011, 19:53:07 »

well just plug the moniter into the socket which is in the motherboard area of the case

most moniters just use the blue DVI socket

dexter7 · « **Reply #12 on:** December 31, 2011, 20:11:46 »

Well, My monitor is on but, it isn't recognizing the motherboard chip... Here's my monitor specs: http://support.acer.com/acerpanam/monitor/0000/Acer/X213/X213sp2.shtml

Ralphy · « **Reply #13 on:** December 31, 2011, 20:19:44 »

So you've got your moniter plugged into the motherboard slot but it's still not working?

dexter7 · « **Reply #14 on:** December 31, 2011, 20:22:54 »

Yes.

Ralphy · « **Reply #15 on:** December 31, 2011, 20:24:47 »

And you're not allowed to open the case?

dexter7 · « **Reply #16 on:** December 31, 2011, 20:26:15 »

No. I'll try to get special permission...

Ralphy · « **Reply #17 on:** December 31, 2011, 20:29:38 »

has it got a warrenty seal on it? If so it would probs be best to return it under warrenty

dexter7 · « **Reply #18 on:** December 31, 2011, 20:31:36 »

No, it's a custom built PC, Kind of like what Danny is doing...

Ralphy · « **Reply #19 on:** December 31, 2011, 20:38:05 »

well if you can get 'special' permission then if you take the graphics card out and then try to boot there shouldn't be any reason why it doesn't. If you do get in you can reset the clock to it's default and then put the card back in.
If it works after that then there's no lasting damage, if it doesn't then it's likely you've fried your GPU

dexter7 · « **Reply #20 on:** December 31, 2011, 20:43:53 »

Nope no permission.

vin_sun · « **Reply #21 on:** December 31, 2011, 22:08:16 »

Quote from: dexter7 on December 31, 2011, 19:35:30

No, I can't, it shuts off immediately after showint the desktop screen..My mum won't let me for some reason... And I hear the GPU running.

You need to open the casing and look inside. Check if the cooling fan on top of the processor has not shifted or become loose. A displaced processor fan causes the computer to shut down soon after it boots.

dexter7 · « **Reply #22 on:** December 31, 2011, 22:22:48 »

Going to try firing up it again...

dexter7 · « **Reply #23 on:** December 31, 2011, 22:33:59 »

No luck with the integrated chip... Going to try the normal card.
I have looked inside the window on the side and it seems the CPU fan is in place.

dexter7 · « **Reply #24 on:** December 31, 2011, 22:42:58 »

Dang it, In other words, I give up.
But I keep getting this error that says
The display driver has stopped responding and recovered.

Author Topic: Help, Urgent! I Broke my computer! (Read 12192 times)