Hello Guest November 01, 2024, 04:34:13 *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
Pages: [1]   Go Down

Author Topic: Message Error  (Read 1980 times)

Bullets

  • Forum member
  • Posts: 25
Message Error
« on: August 31, 2011, 18:10:18 »

 :'( Can you help I shipped today again and restart the 3rd mission oil vessel that I must take a pic of. As normal when you get close enough to the vessel you will receive a message that you are close enough and that you only got a short time to take the pic before they see you.

I do get that message and at the end of that message also standing "message not found" See screen shot image for details.

Logged

sadsid († 2016)

  • IN MEMORIAM
  • Global Moderator
  • Posts: 3608
Re: Message Error
« Reply #1 on: August 31, 2011, 18:15:34 »

Hi bullets
This may seam a stupid thing to ask but are you using F key to take photo.
                                                                                                   Eric
Logged

saltydog

  • Forum member
  • Posts: 7828
Re: Message Error
« Reply #2 on: August 31, 2011, 18:26:43 »

I think this is the one where the oil spill has actually to be seen in the picture.. :)
 (picture taken by Fred)

« Last Edit: August 31, 2011, 18:32:31 by saltydog »
Logged

Bullets

  • Forum member
  • Posts: 25
Re: Message Error
« Reply #3 on: August 31, 2011, 18:27:24 »

Hi bullets
This may seam a stupid thing to ask but are you using F key to take photo.
                                                                                                   Eric
 :doh: No Eric using the icon on right bottom of the screen to take the photo.
Logged

Bullets

  • Forum member
  • Posts: 25
Re: Message Error
« Reply #4 on: August 31, 2011, 18:45:18 »

I think this is the one where the oil spill has actually to be seen in the picture.. :)
 (picture taken by Fred)


Yes indeed the oil spill  ;D
Logged

danny

  • Forum member
  • Posts: 885
Re: Message Error
« Reply #5 on: August 31, 2011, 19:25:29 »

Thats odd, Is it me or does the oil spill appear to be non existant?
Logged
STCW II/1 Unlimited Officer Of the Watch.
Big or small, I'll sail 'em all!

Bullets

  • Forum member
  • Posts: 25
Re: Message Error
« Reply #6 on: August 31, 2011, 19:31:41 »

Thats odd, Is it me or does the oil spill appear to be non existant?
  :doh: The oil spill was there untill I was told to go closer with the RHIB, after that the oil spill was gone, no where to be seen. But my question, is it normal to receive "message not found" at the end of the messages that I receiving.
« Last Edit: August 31, 2011, 19:33:58 by Bullets »
Logged

Mad_Fred

  • Administrator
  • Posts: 8689
  • ✝ In Memoriam
Re: Message Error
« Reply #7 on: August 31, 2011, 23:57:05 »

Hi Bullets,

I have had that problem too on some notifications in some missions. It's rare though.
But it never affected the outcome of the mission itself as long as I keep doing what needs to be done.

Open the pull down menu on it where the more elaborate waypoint info is about what to do on a certain objective or waypoint, that should still be there. I noticed that only the temporary notification has this message not found error on rare occasions.

If you take that picture in a similar fashion that I did, it should just work out fine.

I made a quick clip of it, to show you how I did it, it's in dutch, but you know what those notifications say anyway I reckon. You can see that it goes through just fine when I then take the pic and turn back to the RWIII.

http://www.youtube.com/watch?v=PPqBnvfIkto

Hope that helps.

Regards,
Fred
Logged

Bullets

  • Forum member
  • Posts: 25
Re: Message Error
« Reply #8 on: September 01, 2011, 00:20:05 »

Hi Bullets,

I have had that problem too on some notifications in some missions. It's rare though.
But it never affected the outcome of the mission itself as long as I keep doing what needs to be done.

Open the pull down menu on it where the more elaborate waypoint info is about what to do on a certain objective or waypoint, that should still be there. I noticed that only the temporary notification has this message not found error on rare occasions.

If you take that picture in a similar fashion that I did, it should just work out fine.

I made a quick clip of it, to show you how I did it, it's in dutch, but you know what those notifications say anyway I reckon. You can see that it goes through just fine when I then take the pic and turn back to the RWIII.

http://www.youtube.com/watch?v=PPqBnvfIkto

Hope that helps.

Regards,
Fred
Thanks Fred, I did watch the video clip. maybe I must use the "F" key to take the photo instead of clicking on the camera right botton of the screen. You are helping alot thanks.  :2thumbs:
Logged

Mad_Fred

  • Administrator
  • Posts: 8689
  • ✝ In Memoriam
Re: Message Error
« Reply #9 on: September 01, 2011, 00:39:45 »

You're welcome!

I just used the button though, not the F key.. and it's pretty much the same action that it triggers, it shouldn't matter, but it can't hurt to try!!  :thumbs:
Logged
Pages: [1]   Go Up
 
 


SMF 2.0.14 | SMF © 2017, Simple Machines