Hello Guest March 29, 2024, 15:20:35 *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
Pages: [1]   Go Down

Author Topic: container mission  (Read 1574 times)

nukey

  • Forum member
  • Posts: 1
container mission
« on: June 25, 2010, 23:04:47 »

are there still container mission where you have to work with a super post panamax gantry crane?
if so how detailed are they gonna be?
i was a bit dissapointed of the container mission in ship sim 2008 ( grapgics were good but could be better)
in the misison you could only do 4 container( in a real shift they do about 250 containers)
some sounds were missing like when the crane shifts position
and being albe of taking the hatch covers off the ship
dockers taking the twistlocks of the container when you discharge em
Logged

oceandream

  • Forum member
  • Posts: 1777
Re: container mission
« Reply #1 on: June 26, 2010, 01:39:55 »

Hello nukey and welcome too the forum.
When sse comes out whe can expect all these better graphics and operations Onboard the container vessel and container crane
« Last Edit: June 26, 2010, 01:41:48 by oceandream »
Logged


Join Greenpeace virtual today
We need more members too keep out forum active

McGherkin

  • Forum member
  • Posts: 3153
Re: container mission
« Reply #2 on: June 26, 2010, 14:36:17 »

Hello nukey and welcome too the forum.
When sse comes out whe can expect all these better graphics and operations Onboard the container vessel and container crane

I wouldn't take that as gospel. Container operations may be more realistic, but I doubt that you will be able to load many more than about 20 containers in any one waypoint.


You can load about 10-12 containers in SS08, depending on which ship is being loaded/unloaded. There are probably custom missions which make use of all of the slots on Vermaas/Sherpa/Wachthaven III/e.t.c.

If not, you can always make a mission in mission editor.
Logged
Almost never here, try here.
Pages: [1]   Go Up
 
 


SMF 2.0.14 | SMF © 2017, Simple Machines