Hello Guest November 25, 2024, 15:44:51 *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
Pages: [1]   Go Down

Author Topic: How To Improve FPS! *Tested and Working*  (Read 1185 times)

Ozy783

  • Forum member
  • Posts: 179
How To Improve FPS! *Tested and Working*
« on: November 22, 2009, 00:47:14 »

In this little guide I'm going to show you how to improve you FPS' in gaming and the general performance of your PC by chaning the virtual RAM.

What is Virtual Ram?
Virtual RAM is where you allocate a certain size of your hard drive as RAM (So I think).

Before we start I'm not using my gaming PC but my laptop to show you this because I've already allocated it.

Step 1.
Go To Start > Control Panel and click on System.


Step 2.
Now click on Advanced System Settings. Once it's opened click on the Advanced tab.


Step 3.
Now Click on Settings under Performance.


Step 4.
Now Click on Advanced and then Change.


Step 5.
Untick the box 'Automatically manage paging file size for all drives.


Step 6.
Select the drive you want to allocate for Virtual RAM, Then change 'System Managed File' to 'Custom Size'.


Step 7.
Now type in how many MBs you want to allocate for Virtual Ram and click. (1000mb = 1GB)
WARNING! DO NOT ALLOCATE ALL OF YOUR REMAINING SPACE, LEAVE AT LEAST 20GB OF FREE SPACE.
DO NOT ALLOCATE MORE SPACE THAN YOU HAVE ON YOUR HDD!



Step 8.
Once you've entered your desired amount of Virtual RAM. Click Set. and restart your PC.


if you get an error message, sayin something like this.

Then allocate 1000mb below the mb that it says.
 
Once your PC has booted try one of your games to see the results. Happy Gaming! <3

Regards,
           Oli
Logged
Ship Simulator 2006 & Ship Simulator 2006: Official Addon
Ship Simulator 2008 & Ship Simulator New Horizons
Ship Simulator Extremes & All DLC

My PC:
AMD Athlon x4 630 Processor (4 CPUs), ~2.8GHz
4096MB RAM
Sapphire Radeon HD 5750 (Approx. Total Memory: 2423MB)

TerryRussell

  • Guest
Re: How To Improve FPS! *Tested and Working*
« Reply #1 on: November 22, 2009, 01:58:36 »

If you search through Technical Support, you'll see that I've given similar advice to some people many times in the past. Look for "cache" or "swap file".

BUT you will also see that it can't be done on some PCs. It depends on the processor. Some of them have a quite small maximum size limit for the cache size (which is the memory that you are describing).

Without knowing the specific setup for everyone's PCs, this advice may also case Windows to not start on some machines. Do it at your own risk. I don't want anyone to think that this is official advice so I will move it to small talk.
« Last Edit: November 22, 2009, 02:03:14 by TerryRussell »
Logged
Pages: [1]   Go Up
 
 


SMF 2.0.14 | SMF © 2017, Simple Machines