I know that I have mentioned this before in a comment to Bottman's excellent beta-videos, but as the error is still there in version 1, I will mention it again in the hope that someone from Vstep is reading these comments.
On the Vstep version of Pride of Rotterdam the funnel-mast is missing. This is important because the aft masthead light is mounted in this mast on the original. Instead the aft masthead light is placed in the radar mast just few metres abaft the fore masthead light. But this is an illegal mounting as the 'International Regulations for the Prevention of Collisions at Sea' Annex I concerning 'Positioning and technical details of lights and shapes' states:
3. Horizontal positioning and spacing of lights
(a) When two masthead lights are prescribed for a power-driven vessel, the
horizontal distance between them shall not be less than one-half of the length of
the vessel but need not be more than 100 metres. The forward light shall be
placed not more than one-quarter on the length of the vessel from the stem.This means that on the Pride of Rotterdam (215.1m OA) there has to be at least 100 metres between the two masthead lights...
As the photo shows, the original has a mast by the funnel with the aft masthead light and it is obvious that there is more than one-half of the length of the vessel between the lights.
If Vstep wants to sell this product to navigation schools, the lights must be right.
Best regards
groennegaard