Ship Simulator
English forum => Ship Simulator 2006 => Topic started by: njadve on August 17, 2007, 22:52:07
-
Hi!
I\m wondering if it`s possible to panorate around to see what`s behind you. Now I`ve only found two views, and that`s not too much...
-
Hi!
I\m wondering if it`s possible to panorate around to see what`s behind you. Now I`ve only found two views, and that`s not too much...
Hi! :)
You can look in any direction you like - just press down the right mouse button while you use the mouse.
Regards
groennegaard
-
Yes there are 3 views in SS08.
Press these numbers on your keyboard:
1 - Allows free rotation and pan around the ship. Hold down the right mouse button and move the mouse to change the view.
2 - This is the Helm position. You will appear to be the person controlling the ship from the bridge but unable to move. (You may however move the cam but your position will not move.) You can also rotate the mouse wheel to zoom in and out.
3 - The most desired and popular view as you can walk around the ships. Hold down the right mouse button and use the arrow keys to move.
Hope that helps ;)
-
Does this also work on the 06- version? I only have this one so far...
And a another thing, is there any place where it´s a overview over allthe controls? The ones I found in the help-file was just a few that were quite obvious...
-
Does this also work on the 06- version? I only have this one so far...
And a another thing, is there any place where it´s a overview over allthe controls? The ones I found in the help-file was just a few that were quite obvious...
Yes the controls above work in the 06 version apart from number 3. Number 3 only works if you have the add-on pack for SS06.
As for your second question, do you mean you want to see a list of ALL of the controls in the game? Such things as keyboard shortcuts?
-
Yes there are 3 views in SS08.
There are actually 5 views on SS '08, try the 4 and 5 keys also ;)
Regards.
DJM.
-
Yes the controls above work in the 06 version apart from number 3. Number 3 only works if you have the add-on pack for SS06.
As for your second question, do you mean you want to see a list of ALL of the controls in the game? Such things as keyboard shortcuts?
Yes, I have missed a list over the controls so if there is a list or something it would be nice...
The camera thing with numbers doesn´t work on my SS06, but the C-key switches between the two different views...
-
hi i was wondering if anyone had a solution to why my ss08 wont let me play it will load past the first 2 screens and then an error report appears her is my ------------------
System Information
------------------
Time of this report: 9/25/2007, 13:47:17
Machine name: SN047280620012
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: Packard Bell NEC
System Model: 00000000000000000000000
BIOS: BIOS Date: 07/11/05 18:56:38 Ver: 08.00.09
Processor: Intel(R) Pentium(R) 4 CPU 3.06GHz
Memory: 446MB RAM
Page File: 231MB used, 1462MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: SiS Mirage Graphics
Manufacturer: SiS
Chip type: SiS 661
DAC type: Internal
Device Key: Enum\PCI\VEN_1039&DEV_6330&SUBSYS_E0121631&REV_00
Display Memory: 64.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: SiSGRV.dll
Driver Version: 6.14.0010.3780 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 1/23/2007 12:39:44, 3514368 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: sisgrp.sys
Mini VDD Date: 1/23/2007 12:35:18, 317952 bytes
Device Identifier: {D7B71ED9-2070-11CF-457B-18C0A1C2CB35}
Vendor ID: 0x1039
Device ID: 0x6330
SubSys ID: 0xE0121631
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_D ModeMPEG2_C ModeMPEG2_A ModeMPEG1_A
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
-------------
Sound Devices
-------------
Description: Realtek AC97 Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1039&DEV_7012&SUBSYS_E0121631&REV_A0
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ALCXWDM.SYS
Driver Version: 5.10.0000.6250 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/7/2007 18:33:12, 4108992 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 192000
Static/Strm HW Mix Bufs: 26, 25
Static/Strm HW 3D Bufs: 26, 25
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
---------------------
Sound Capture Devices
---------------------
Description: Realtek AC97 Audio
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: ALCXWDM.SYS
Driver Version: 5.10.0000.6250 (English)
Driver Attributes: Final Retail
Date and Size: 8/7/2007 18:33:12, 4108992 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Can anyone help??? please i am reli anxious to play this game email me if anyone had a way to fix my problem danielgibson26@hotmail.co.uk
-
Hiya daniel666 :)
As has already been pointed out, you have to post Technical questions in the Technical Support board, plus you have posted in the Ship Sim 2006 section.
Regards.
DJM.