Topic: Computer for SHip Sim08? (Read 6849 times)

kid that uses the toilet a lot · « **on:** February 18, 2008, 20:24:03 »

I'm going to buy a new PC for gaming and stuff. MOstly for SHip SIm 08.
Would this pc take ship sim 08 on full graphic?

CPU: Intel Core 2 Duo E6750
Graphic card: 8800GTS
Memory: Corsair TWIN2X 6400 DDR2, 2048MB CL5 Kit w/two matched CM2X1024A-6400 Dimms

kid that uses the toilet a lot · « **Reply #1 on:** February 18, 2008, 20:32:12 »

It's Vista if it matter.

Lanedre · « **Reply #2 on:** February 18, 2008, 22:28:51 »

Yes it will handle ShipSim on full graphics

JHB · « **Reply #3 on:** February 19, 2008, 01:37:42 »

Nice system there

I use the bathroom very often...

Agent|Austin · « **Reply #4 on:** February 19, 2008, 02:09:50 »

Quote from: JHB on February 19, 2008, 01:37:42

I use the bathroom very often...

WTF?

Mad_Fred · « **Reply #5 on:** February 19, 2008, 03:18:57 »

Quote from: Agent|Austin on February 19, 2008, 02:09:50

WTF?

If you're gonna boost your post count, at least try to do it in a polite manner!

Regards,
Fred

kid that uses the toilet a lot · « **Reply #6 on:** February 19, 2008, 18:38:46 »

How does Windows Vista works with Ship sim?

saltydog · « **Reply #7 on:** February 19, 2008, 19:19:28 »

With Vista you may want 4 Gb of RAM, I'm not sure that's in the above setup..

Captain Spencer · « **Reply #8 on:** February 19, 2008, 19:31:04 »

Get a new username. It's disgusting!

Lanedre · « **Reply #9 on:** February 19, 2008, 20:08:12 »

Keep in mind that if you have 4Gb in Vista 32 bit it will only use about 3,3Gb of the ram(I have 4Gb in Vista 32 bit just because I want as much as possible

)

[RWP]DJM · « **Reply #10 on:** February 19, 2008, 23:42:54 »

Quote from: CaptainSpencer on February 19, 2008, 19:31:04

Get a new username. It's disgusting!

It's much better than it was

TerryRussell · « **Reply #11 on:** February 20, 2008, 00:08:51 »

Quote from: saltydog on February 19, 2008, 19:19:28

With Vista you may want 4 Gb of RAM, I'm not sure that's in the above setup..

Minimum spec for Vista is 2Gb. However, extra memory is always useful no matter what applications you're running. With prices being relatively cheap, now is a good time to buy it (and install it, to be really useful).

saltydog · « **Reply #12 on:** February 20, 2008, 00:10:37 »

My same thoughts Terry, better to have it installed before you buy it..

TerryRussell · « **Reply #13 on:** February 20, 2008, 00:14:21 »

Quote from: saltydog on February 20, 2008, 00:10:37

better to have it installed before you buy it..

Personally, I like ripping open brand new PCs and stuffing them with more memory, extra disk controllers, bigger power supplies and many TB of hard drives.

But then, I am a geek.

saltydog · « **Reply #14 on:** February 20, 2008, 00:16:38 »

I had a bit of cold feet when I first had to open up my computer, but it is a good way to understand a bit what goes on in there..I'm still a tourist though..

[RWP]DJM · « **Reply #15 on:** February 20, 2008, 00:18:17 »

Quote from: saltydog on February 20, 2008, 00:16:38

I had a bit of cold feet when I first had to open up my computer, but it is a good way to understand a bit what goes on in there..I'm still a tourist though..

Tourism is always a good start, it can be fun learning all about your PC for the first time

saltydog · « **Reply #16 on:** February 20, 2008, 00:21:11 »

I confine myself to checking the oil and changing the spark-plugs, so to speak..

TerryRussell · « **Reply #17 on:** February 20, 2008, 00:21:26 »

Quote from: [RWP]DJM on February 20, 2008, 00:18:17

Tourism is always a good start, it can be fun learning all about your PC for the first time

But I strongly reccommend that start with an old spare one! Don't use the trusty main PC, in case you need to download a driver or similar...

TerryRussell · « **Reply #18 on:** February 20, 2008, 00:22:21 »

Quote from: saltydog on February 20, 2008, 00:21:11

I confine myself to checking the oil and changing the spark-plugs, so to speak..

Oh dear. I took you literally. Excuse me while I wipe the 3-in-1 from my PC.

[RWP]DJM · « **Reply #19 on:** February 20, 2008, 00:23:33 »

Quote from: saltydog on February 20, 2008, 00:21:11

I confine myself to checking the oil and changing the spark-plugs, so to speak..

LOL, nice description

Quote from: TerryRussell on February 20, 2008, 00:21:26

But I strongly reccommend that start with an old spare one! Don't use the trusty main PC, in case you need to download a driver or similar...

Indeed

Although I'm quite brave with tech stuff most of the time. I crashed my first PC 20+ times in the first few weeks (full reinstall required each time), but I knew exactly what it was capable of after that

saltydog · « **Reply #20 on:** February 20, 2008, 00:25:18 »

I actually did that oil thing once, years ago. A girlfriend had a crackly volume-control on her transistor-radio, so I poured some oil in it..
It didn't help..

[RWP]DJM · « **Reply #21 on:** February 20, 2008, 00:26:16 »

Quote from: saltydog on February 20, 2008, 00:25:18

I actually did that once, years ago. A girlfriend had a crackly volume-control on her transistor-radio, so I poured some oil in it..
It didn't help..

Hint: Switch Cleaner

saltydog · « **Reply #22 on:** February 20, 2008, 00:27:20 »

Yes, I know that now..

[RWP]DJM · « **Reply #23 on:** February 20, 2008, 00:28:17 »

I think I'm being over-helpful then

Must be nearly sleep-time I guess

TerryRussell · « **Reply #24 on:** February 20, 2008, 00:29:35 »

Quote from: [RWP]DJM on February 20, 2008, 00:26:16

Hint: Switch Cleaner

Actually, 4B pencil works best. I used to open up the pot, then gently run a the 4B pencil round the track. Worked perfectly!

I still do that for the few things that use a carbon potentiometer. (Told you I'm a Geek!).

Author Topic: Computer for SHip Sim08? (Read 6849 times)

TerryRussell

TerryRussell

TerryRussell

TerryRussell

TerryRussell