Hello Guest December 23, 2024, 20:54:17 *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
Pages: [1]   Go Down

Author Topic: Air Draught of the Inland Container Vessel?  (Read 1518 times)

The Ferry Man

  • Forum member
  • Posts: 10787
Air Draught of the Inland Container Vessel?
« on: January 13, 2012, 01:11:57 »

Hi Guys, anyone know what the Air Draught is of the Inland Container vessel Mare Australis?

Many Thanks
Logged

TFMs Guide to Crossing the Dover Channel (http://forum.shipsim.com/index.php/topic,21107.0.html)

LucAtC

  • Ship Simulator Developer
  • Global Moderator
  • Posts: 2238
Re: Air Draught of the Inland Container Vessel?
« Reply #1 on: January 13, 2012, 01:58:55 »

Hello TFM,
The air draught is 9.80 m to the top of the bridge roof, 11.25 m to the highset point, hopefully the tip of the antennas. The measures have been taken at the actual water draught.

Regards,
Luc
Logged

The Ferry Man

  • Forum member
  • Posts: 10787
Re: Air Draught of the Inland Container Vessel?
« Reply #2 on: January 13, 2012, 12:08:18 »

Ahh OK Thanks

Slightly higher then I thought...

See there are some inland boats that sail on this canal and under these bridges in Dunkerque:

http://maps.google.co.uk/?ll=51.034723,2.365172&spn=0.001155,0.00284&t=h&z=19&vpsrc=6&layer=c&cbll=51.034665,2.365373&panoid=eYjeKLAy99O5uM2Ug4-UiQ&cbp=12,284.52,,0,6.54

You can see them here:

http://maps.google.co.uk/?ll=51.033362,2.363644&spn=0.000581,0.00142&t=h&z=20&vpsrc=6

I was hoping she would fit too... well you never know

Thanks again :)
Logged

TFMs Guide to Crossing the Dover Channel (http://forum.shipsim.com/index.php/topic,21107.0.html)
Pages: [1]   Go Up
 
 


SMF 2.0.14 | SMF © 2017, Simple Machines