Topic: azi-less on the 'jumbo' (Read 1156 times)

dustytrails · « **on:** December 09, 2008, 10:56:07 »

i have the ship-addon the MV JUMBO JAVELIN and have discovered that an zimuth 360 controller has been added, but it does not work...why?

Sam · « **Reply #1 on:** December 09, 2008, 14:13:35 »

It does work!

It just isn't used as main propulsion.
Only for manouvering and offshore work.

On a ship you must have patience.

And, u have to use your mouse.

If you search the forum, then you will find more topics about this.

Traddles · « **Reply #2 on:** December 09, 2008, 16:37:36 »

If you stop the ship and use bow thruster to port and azimuth drive to starboard you will turn the ship round without her moving ahead or astern. As Sam says, she is a big ship and one needs to wait whilst the momentum builds up. You will see the wake effect from the azimuth drive appearing about two thirds of the length of the ship from the bow.

moyeraj · « **Reply #3 on:** December 12, 2008, 22:57:02 »

Thanks Traddles,
That's the information I've been searching for. Should be added to JJ control manual.

Author Topic: azi-less on the 'jumbo' (Read 1156 times)

dustytrails

azi-less on the 'jumbo'

Sam

Re: azi-less on the 'jumbo'

Traddles

Re: azi-less on the 'jumbo'

moyeraj

Re: azi-less on the 'jumbo'