Home
Help
Search
Login
Register
Hello
Guest
December 23, 2024, 00:25:48
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Ship Simulator
>
English forum
>
Ship Simulator Extremes
>
General discussions
>
modified ship control unit
Pages: [
1
]
Go Down
Print
Author
Topic: modified ship control unit (Read 7233 times)
Bonuz
Forum member
Posts: 6
modified ship control unit
«
on:
August 05, 2013, 11:07:04 »
Hi every body. I just thaught i would share with you my extended ship control unit.
After playing the game for about a year with it unmodified i was getting a little bored not to be able to use it on t he ships with directed thrust ( bugsier..) so i took a look on the forum and decided to build my own azipod controller. And bolted it to the ship control unit. It might not be the most ergonomic design but it makes gameplay a whole lot more interresting.
( i hope the pic got into the post.never tried it earlier.)
«
Last Edit: August 05, 2013, 11:30:01 by Bonuz
»
Logged
Bonuz
Forum member
Posts: 6
Re: modified ship control unit
«
Reply #1 on:
August 05, 2013, 11:27:55 »
Some more pics...
I used the bu0836 card ,4 pots, lego, a 3, 5mm headphone cable and a lot of hot glue.
Logged
Capetan Thanasis
Forum member
Posts: 89
Re: modified ship control unit
«
Reply #2 on:
August 05, 2013, 13:40:33 »
Hi Bonuz,
can you give us more information about materials, wiring plan, etc...
Thank you.
«
Last Edit: August 05, 2013, 13:45:37 by Capetan Thanasis
»
Logged
Best Regards
Thanasis
Bonuz
Forum member
Posts: 6
Re: modified ship control unit
«
Reply #3 on:
August 11, 2013, 17:08:29 »
I Will make some drawings when i get home in one week but for now i thought som more info could help..
The main piece is the bu0836 card. You can find it at leo bodnar with some instructions on how to connect it. No programming needed.
Two potentiometers per throttle unit. One 360° pot for rudder and one with 240° rotation for throttle.since the throttle pot sits inside the turning handle i used a 3, 5mm headphone connection inside of the rotating axis allowing continous turning. The rudder pot was the big problem until i found these two lego cogwheels that allowed me to move the pot to the side. I used two electrical connection boxes as base . Some pvc pipe as turning handle and vertical axis.
Logged
Capetan Thanasis
Forum member
Posts: 89
Re: modified ship control unit
«
Reply #4 on:
August 11, 2013, 21:03:47 »
Thank you for your answer. I will be waiting for drawings, when you will be able to make them.
Logged
Best Regards
Thanasis
Captain Cadet
Forum member
Posts: 1708
Re: modified ship control unit
«
Reply #5 on:
August 12, 2013, 06:52:26 »
I like your thinking!
Why bother waiting!
How hard would it be to make an entire ship control unit?
Logged
Captain Cadet
Please don't message me for technical support!
Bonuz
Forum member
Posts: 6
Re: modified ship control unit
«
Reply #6 on:
August 12, 2013, 19:36:40 »
After building these i dont think it would be that hard just decide how you want it before you start. I changed my idea a few times and had to restart. The card will support 8 analog inputs and 32 buttons. And then you can design it as you like. Only your imagination is the limit. I believe the jumbo javelin uses 6 analog. I just think it is hard to become satisfied when you build it yourself...always thinking on upgrades.different shape on handles more buttons.hat switch and on and on.
Logged
petecaler
Forum member
Posts: 13
Re: modified ship control unit
«
Reply #7 on:
August 23, 2013, 00:09:30 »
Bonuz,
Please post any plans you might have when you can, my son and I are looking forward to this project and are excited about your approach.
Thanks for what you have posted so far, the units look great!!!
Logged
Print
Pages: [
1
]
Go Up
Ship Simulator
>
English forum
>
Ship Simulator Extremes
>
General discussions
>
modified ship control unit
Loading...