Hello Guest November 24, 2024, 17:40:40 *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
Pages: 1 [2]   Go Down

Author Topic: Ship Simulator Great Lakes Edition  (Read 18714 times)

bulkcarrier

  • Forum member
  • Posts: 71
Re: Ship Simulator Great Lakes Edition
« Reply #25 on: November 13, 2008, 07:45:09 »

Yes, dredging is an ongoing thing.   Here are a few I took of the Mississagi, outbound on the Saginaw River in July, passing through the Lake States Railway swing bridge.  Hope you enjoy!

Best Regards,

Galen








Logged

"Sarnia Traffic..The American Valor..Up at 1 & 2, 4 and a half hours to Harbor Beach"

NIN

  • Forum member
  • Posts: 59
Re: Ship Simulator Great Lakes Edition
« Reply #26 on: November 14, 2008, 20:09:28 »

Do they dredge the rock cut?

I think its a good idea, unlike most people who think these are only knee deep ponds that we use for "playgrounds" I have not been to any European ports so I don't know how difficult it is to navigate them. The lakes have many challenges, from strong currents, to narrow rivers with bridges, to extremely narrow rivers with  tight turns. There are also locks and tight channels. Now a 1000ft boat in Rotterdam needs how many tugs? The 1000ft ore carriers navigate without the need of tugs. its only an idea, I'm sure flight sim didn't have the full world available at first.

Heres some shots of the mail boat in Detroit.























Logged

Agent|Austin

  • Forum member
  • Posts: 4818
Re: Ship Simulator Great Lakes Edition
« Reply #27 on: November 14, 2008, 20:34:23 »

I still don't know that side on that ship it the front... ^^
Logged

NIN

  • Forum member
  • Posts: 59
Re: Ship Simulator Great Lakes Edition
« Reply #28 on: November 14, 2008, 23:46:25 »

I still don't know that side on that ship it the front... ^^

what?
Logged

davepusey

  • Forum member
  • Posts: 168
Re: Ship Simulator Great Lakes Edition
« Reply #29 on: November 15, 2008, 00:03:52 »

I still don't know that side on that ship it the front... ^^

The pointy end is the the front!
Logged
Dave Pusey
Sherpa Captain

jumbo_nth

  • Forum member
  • Posts: 24
Re: Ship Simulator Great Lakes Edition
« Reply #30 on: November 15, 2008, 22:46:09 »

I suppose doing the Great Lakes would be a huge amount of work. Basicly I think the most interesting part (and scenic) is from Montreal through the seaway into the first lake (Ontario if I recall correctly). In my opinion this would only make sense if we can get the locks working.
Next the Welland canal with even more locks is not as nice a scenery but would get you into the second lake.

Our ships (altough not the Jumbo Javelin (she's too big)) regulary go all the way upto Duluth and Thunderbay for the refinery equipment used on the oilfields and tar-sands.
Logged

alg0912

  • Forum member
  • Posts: 19
Re: Ship Simulator Great Lakes Edition
« Reply #31 on: November 21, 2008, 03:33:57 »

It should also include the Windoc and the Allenburg Bridge. ;)

http://www.youtube.com/watch?v=D2Wn2RDzsvg
Logged

bulkcarrier

  • Forum member
  • Posts: 71
Re: Ship Simulator Great Lakes Edition
« Reply #32 on: November 22, 2008, 00:58:19 »

I suppose doing the Great Lakes would be a huge amount of work. Basicly I think the most interesting part (and scenic) is from Montreal through the seaway into the first lake (Ontario if I recall correctly). In my opinion this would only make sense if we can get the locks working.
Next the Welland canal with even more locks is not as nice a scenery but would get you into the second lake.

Our ships (altough not the Jumbo Javelin (she's too big)) regulary go all the way upto Duluth and Thunderbay for the refinery equipment used on the oilfields and tar-sands.


Jumbo Vision is in Duluth as we speak...  Wonderful vessels.  I greatly enjoy the Jumbo Javelin in SS08.  You folks at SS and Jumbo did a GREAT thing providing us with it.  I will always be a customer here!

Best Regards,

Galen
Logged

"Sarnia Traffic..The American Valor..Up at 1 & 2, 4 and a half hours to Harbor Beach"

Goldens2

  • Forum member
  • Posts: 53
Re: Ship Simulator Great Lakes Edition
« Reply #33 on: November 22, 2008, 05:21:45 »

I suppose doing the Great Lakes would be a huge amount of work. Basicly I think the most interesting part (and scenic) is from Montreal through the seaway into the first lake (Ontario if I recall correctly). In my opinion this would only make sense if we can get the locks working.
Next the Welland canal with even more locks is not as nice a scenery but would get you into the second lake.

Our ships (altough not the Jumbo Javelin (she's too big)) regulary go all the way upto Duluth and Thunderbay for the refinery equipment used on the oilfields and tar-sands.


I'd fully agree with you as I live along this section of the great lakes. I've seen a couple of your ships go through, however I can't seen to recall the name of the ship.
 
                                                                                                            ~Jake
Logged
"You miss 100% of the shots you don't take."
                 ~Wayne Gretzky

This applies to Photography too!

DECKHAND96

  • Forum member
  • Posts: 19
Re: Ship Simulator Great Lakes Edition
« Reply #34 on: November 22, 2008, 06:22:57 »

I would like to see some great lakes ships and ports like the Arthur M. Andrson, the Oglebay Norton,and the Paul R. Tregutha and ports like duluth, thunder bay, and Sault Ste. Marie.
Logged

davolson

  • Forum member
  • Posts: 17
Re: Ship Simulator Great Lakes Edition
« Reply #35 on: October 11, 2010, 03:26:03 »

Time to reopen the discussion on a Great Lakes Edition or Ad on.   hmmmm... most of north American users are probably NOT in NY or San fransisco  but quite a few, as well as our canadian friends have greater familiarity and interest in the Great Lakes.  I'd keep it in mind.
Logged
Capt Dave
USCG Six pack Capt. Great Lakes. (ret)

Intel Core i7  Q720  1.6GHz 4GB RAM
NVIDIA GeForce GT 230M 2773 MB

cptnchris

  • Forum member
  • Posts: 755
Re: Ship Simulator Great Lakes Edition
« Reply #36 on: October 11, 2010, 03:40:24 »

Im in Missouri, with not major water systems (except rivers, but im in the southwest corner of boring-ness), but a Great Lakes addon would be pretty sweet. It would take alot of work, but It would be very cool  :thumbs:
Logged

Chitch

  • Forum member
  • Posts: 148
Re: Ship Simulator Great Lakes Edition
« Reply #37 on: October 12, 2010, 00:34:41 »

Nice pics!!  I live south of Lake Ontario, and if I want to do the Great Lakes, I have to go to (gulp) Virtual Sailor and use their Great Lakes addon.....not my favorite selection (VS), but it's better than not being able to at all.

VS leaves a lot to be desired when you put it up against either SSE or SS 08...ship handling is pretty....unusual, but again, if you want to sail the Lakes, then that's about your only choice....costs $30 (US) to d/load from their site.  The Lakes addon is a free d/load as are a couple of Lake Boats.

Jim
Logged
Pages: 1 [2]   Go Up
 
 


SMF 2.0.14 | SMF © 2017, Simple Machines