Topic: dock crane (Read 4395 times)

rooster · « **on:** July 15, 2007, 20:53:55 »

Where can I fine instructions on operating the dock crane. I can move it around the dockside and hoist up and down but cannot work out how to grab the container

tecumseh · « **Reply #1 on:** July 15, 2007, 21:31:01 »

Hi,
Tecumseh, And do you have a joystick? If you do and if it has a trigger than try pressing the trigger.

con875 · « **Reply #2 on:** July 15, 2007, 22:16:39 »

Can someone make a video of the crane.

Master Captain · « **Reply #3 on:** July 16, 2007, 01:22:11 »

i'm on it

[RWP]DJM · « **Reply #4 on:** July 16, 2007, 01:26:43 »

Typical, I've just completed one too lol

Ah well, I'll hand this one over to you then

Master Captain · « **Reply #5 on:** July 16, 2007, 01:42:19 »

well i got the vid recorded, edited and i started the final run test, and i saw that it was a failure

my screen recoder is not good enough for Ship Sim 08, so DJM, i'm turning it back over to you. KM

[RWP]DJM · « **Reply #6 on:** July 16, 2007, 01:44:57 »

Okie Dokie, I will post it in the Media Board, after I upload it of course

Regards.

DJM.

Sam · « **Reply #7 on:** July 16, 2007, 08:25:51 »

It just is page up/page down to lower the cable, HOME to grab/release a container and the arrows to move in all directions.

ship sim boy · « **Reply #8 on:** December 31, 2008, 16:38:43 »

hi i have got a problem with the crane !!

how do you winch up and down on the crane ?? with out useing a joystick !!

what buttons do i use ??

stevie

Aad The Pirate · « **Reply #9 on:** December 31, 2008, 17:01:28 »

Ahoy ship sim boy,
First of all: Welcome to the forum.
When You start the game there is an option called OPTIONS (third one from top).
When Youre there there is an option called CONTROLS (again third one from top).
And there You'll find the option to view or change the keys necessary for crane control
Good Luck and happy sailing, also in the New Year.
Regards
Aad

mvsmith · « **Reply #10 on:** January 01, 2009, 15:53:38 »

http://www.shipsim.com/ShipSimForum/index.php/topic,2886.msg28895.html#msg28895 (http://www.shipsim.com/ShipSimForum/index.php/topic,2886.msg28895.html#msg28895)

MrFlappy102 · « **Reply #11 on:** January 03, 2009, 01:40:30 »

Wow, we finally get the video a little less than two years after this topic was started

Mad_Fred · « **Reply #12 on:** January 03, 2009, 08:26:18 »

It's not a video, it's a manual, and where did you get that two year period from? I think the edit that included the crane controls is a lot older than the last post edit.

Best to check it out first, and reply afterwards.

Agent|Austin · « **Reply #13 on:** January 03, 2009, 08:29:39 »

"Â« Reply #7 on: July 16, 2007, 00:25:51 Â»"

Mad_Fred · « **Reply #14 on:** January 03, 2009, 08:31:31 »

Actually, he said "started", which would mean the 15th.

Aad The Pirate · « **Reply #15 on:** January 03, 2009, 14:42:27 »

Ahoy Ship(sim)mates,
Does all this chatter in the last four entrys mean that a NEW Forum member isn't allowed to ask a Question in an old thread?
I don't think so.
Regards
Aad

Mad_Fred · « **Reply #16 on:** January 03, 2009, 14:47:48 »

Hi Aad,

Nope, I don't think any of it meant thÃ¡t, on the contrary.

I was just pointing out that there was no video, nor that it took years for the crane controls to be added to the manual.

But sometimes people just blurt out something, and that can add confusion, not help, to our new members.

Regards,
Fred

mvsmith · « **Reply #17 on:** January 03, 2009, 16:49:12 »

Hi Aad,
Nothing in those last posts was directed at Ship Sim Boy.
You and I posted helpful info. It was the â€œflappingâ€ without bothering to even see what was in the link that started the exchange.
Regards,
Marty

Aad The Pirate · « **Reply #18 on:** January 03, 2009, 16:56:13 »

Ahoy Fred and Marty,
No harm done, I hope. Message understood, crystalclear. There will always be a loudmouth who chatters whitout reading properly.
regards
Aad

Poll

Controls

Author Topic: dock crane (Read 4395 times)

mvsmith

mvsmith