Ship Simulator
English forum => Ship Simulator 2008 => Topic started by: ADDUBYA on July 08, 2007, 07:59:30
-
Perhaps we should start a topic for bug reports to help the developers address known problems before future patches. I don't intend for it to become a "wish list" but a place to post problems encountered while playing the new Ship Sim '08 as well as future patches.
I've also encountered the problems noted by others when the game switches environments while in missions.
I've also noticed that the port bridge wing on the VLCC is missing the rudder control.
This is not meant to be a complaint and I hope it will help future development.
-
A container on the container ship is missing a side.
-
At two of the Pride of Rotterdam's stairs, on the stern, you can go down, but not up.
Edit: Menu -> Options -> Tick Run Windowed, Apply settings, nothing happens. Still fullscreen.
-
Hello,
i have also a bug found on the Vermaas. if i walk to frontside of the Vermaas, than i cant go further because the mooring.... (my english is not so good)
Greetz,
Eelkon
-
i have also a bug found on the Vermaas. if i walk to frontside of the Vermaas, than i cant go further because the mooring....
Hi Eelkon! :)
I think this was made on purpose. It takes a lot of time to prepare a ship for the walkthrough-mode. There are lots of places on board the ships that you cannot go. Perhaps these areas will be opened later but I am not sure.
Regards
groennegaard
-
I got a picture of something weard who happened when I was out crusing with the Pride of Rotterdam ;D
-
Freight captains MUST reduce the rum ration I think...
Stu
-
Freight captains MUST reduce the rum ration I think...
Stu
It certainly looks like they should ;D
-
I have always heard where little ships came from but this is the first time I actually see a mothership gives birth to one.
-
Hi Eelkon! :)
I think this was made on purpose. It takes a lot of time to prepare a ship for the walkthrough-mode. There are lots of places on board the ships that you cannot go. Perhaps these areas will be opened later but I am not sure.
Regards
groennegaard
I was able to walk on the forward part of the Vermaas!
But, I had to do that thing where you point the camera upwards and then fly. But, once you get around that mooring bollard, you can walk along that area until you get all the way to the front! And I don't think it was on purpose. I see nothing wrong with the area. Nothing to hide that I can see ;) :D
So, I guess the bollard just needs to be moved.
-
I couldn't get the PoR to moor properly in the mooring terminal mission (Sorry I've forgotten the name lol)
I managed to moor the stern ropes but the bows just wouldn't complete the waypoint ???
I've had this type of thing happen before. Mooring sometimes seems like it doesn't set off the waypoint.
-
I was able to walk on the forward part of the Vermaas!
But, I had to do that thing where you point the camera upwards and then fly. But, once you get around that mooring bollard, you can walk along that area until you get all the way to the front! And I don't think it was on purpose. I see nothing wrong with the area. Nothing to hide that I can see ;) :D
So, I guess the bollard just needs to be moved.
The bollards are put there on purpose, but there might a small suprise for you in the upcoming patch... ;)
-
I couldn't get the PoR to moor properly in the mooring terminal mission (Sorry I've forgotten the name lol)
I managed to moor the stern ropes but the bows just wouldn't complete the waypoint ???
I've had this type of thing happen before. Mooring sometimes seems like it doesn't set off the waypoint.
I have never expirienced this... Try connecting the lines in a differet way - you have to make use of all the bollards.
Regards
groennegaard
-
I have never expirienced this... Try connecting the lines in a differet way - you have to make use of all the bollards.
Regards
groennegaard
I had spent a good half and hour trying to get the waypoint but it refused on me lol. I tried to reconnect them, disconnect them again. I even connect all the ropes on the Port side but to no avail. I'm sure this was a bug.
-
Hmm well its been well documented but im going to be the first to post it in the appropriate section ;D.Titanic has a tendency to develop lists for no apparent reason,similarly when spawned in some environments it starts to fly and sink or even occasionally spawn's you on the dock :-\Neways patch soon just hope they dont rush it like they did the game....
-
I got a picture of something weard who happened when I was out crusing with the Pride of Rotterdam ;D
same here
-
1.on the pride of rotterdam, by the lifeboats, a piece of the wall is only visible from outside and not from inside
and on one of the top decks, suddenly the windows are placed out of the frame
2. a dancing oil-rigg
3.titanic is too slow
4.hopping on deck of titanic when you are walking
5.one of the telegraph pilars of the titanic has a strange texture on it
-
There are some of my cool bugs: (http://Shipsim2008_081307100934_005.jpg)
-
Cruise to Phi Phi
After leaving San Francisco Harbor my damn ship sank!
-
Cruise to Phi Phi
After leaving San Francisco Harbor my damn ship sank!
Hi Capt. Jack :)
This bug is well-known and I can reassure you that it will be fixed in the next patch.
Regards
groennegaard
-
Cruise to Phi Phi
After leaving San Francisco Harbor my damn ship sank!
well, it looks very funny, like if the pride of rotterdam try's to hide himself :D
-
P&Os first submarine?
Stu
-
I'm having a strange problem.. Twice so far, when loading the Titanic in the ports of New York, Marseille, and Hamburg, well, parts of the ship look like this...
(http://i77.photobucket.com/albums/j68/hudizzle17/Shipsim2008_091407192358_881.jpg)
(http://i77.photobucket.com/albums/j68/hudizzle17/Shipsim2008_091407192406_882.jpg)
(http://i77.photobucket.com/albums/j68/hudizzle17/Shipsim2008_091407192427_885.jpg)