Ship Simulator
English forum => Ship Simulator 2008 => General discussions => Topic started by: Thorinkiller on May 15, 2007, 02:41:26
-
like the titanic i could only walk on the decks not inside the rooms :'(
-
That would be AMAZING...but you do have to realize we are on a simulator, and will cost lots of lag. I just get lag from the walkaround on the titanic, just imagine the intricate pieces of the engines.
-
I would like it but the engine would need to be able to streamline the process of computing the mvoign about so it does not generate a ton of lag.
-
Hmm.....
GeForce 1,000,000,000,000 anyone? :P
Imagine the CPU and Graphics to keep that up to speed :o :o :o :o :o
Good idea, but I doubt it would be as enjoyable because of the, as stated....'lag', even on a high-end system :(
Regards.
DJM
-
Well, that is not entirely too. It is all in good programming and such. Many other games have gone more complex and have maintained high frame rates on lower power systems than what S2008 requires.
-
Well, that is not entirely too. It is all in good programming and such. Many other games have gone more complex and have maintained high frame rates on lower power systems than what S2008 requires.
Very true :)
This is also true of really old games that have 'blown us out of the water'....Amiga, SNES games spring to mind, but that could just be me showing my age :P
Regards.
DJM.
-
As a technician I would like to see the engine room too. But in my opinion, ShipSim should simulate the decks crew tasks. So I could live very well without the whole interieur of the vessels, if the ships behaviors come closer to reality!
Cheers
-
As a technician I would like to see the engine room too. But in my opinion, ShipSim should simulate the decks crew tasks. So I could live very well without the whole interieur of the vessels, if the ships behaviors come closer to reality!
Cheers
Sound interesting... :) :)
-
Walking through the enginerooms would be indeed nice. There are some points in favor of such a walkmode though.
In an engineroom, you dont see anything outside, the graphic burden can be reduced accordingly.
Moreover, mechanical parts have simple forms and need relatively less textures, that is why it could be envisaged. Indeed, nowadays, you see less -if any at all- moving parts in enginerooms.
Would the biggest problem not be then new requirements regarding many engineer's tasks?
It would be perhaps possible for modelers to develop sets of standard engines, pumps, tanks, tubes, valves to equip enginerooms, staircases, ..?
Regards
Luc
-
Walking through the enginerooms would be indeed nice. There are some points in favor of such a walkmode though.
In an engineroom, you dont see anything outside, the graphic burden can be reduced accordingly.
Moreover, mechanical parts have simple forms and need relatively less textures, that is why it could be envisaged. Indeed, nowadays, you see less -if any at all- moving parts in enginerooms.
Would the biggest problem not be then new requirements regarding many engineer's tasks?
It would be perhaps possible for modelers to develop sets of standard engines, pumps, tanks, tubes, valves to equip enginerooms, staircases, ..?
Regards
Luc
You are right. I wonder if a "mode" shift could be made between the interior portion of the engine room and other walk around areas, thereby reducing calcuation loads. Hrm. . . . Good point indeed. There would be a way to work it out.
-
From a techincal point though, whilst in the engine room the computer still has to 'think' about what the ship is doing and how it is acting etc- location, speed, collisions.
Just because it isn't showing the bridge, it would still need to think about it!
I would (despite appearances) like to see an engine room, but I think to make it sufficently detailed you would be talking about a seperate programme.
Stuart
-
From a techincal point though, whilst in the engine room the computer still has to 'think' about what the ship is doing and how it is acting etc- location, speed, collisions.
Just because it isn't showing the bridge, it would still need to think about it!
I would (despite appearances) like to see an engine room, but I think to make it sufficently detailed you would be talking about a seperate programme.
Stuart
I am aware the process would still be occurring. However, without being able to "see" the outside world, is there a way to streamline the processing since you will not see anything? That is why I mentioned something about a mode shift . . . If it is even possible. Where when you go to engine rooms and such, you reduce the polygon processing of the exterior world but maintain some close proximity processing, therefore maintaing other calculations of the vessel moving, if it were to be in a collision, etc.
However, with what everyone is talking about here . . . . Would their be usable controls in this room or would it be just visual?