Ship Simulator

English forum => Ship Simulator 2008 => Topic started by: beechjetkid17 on September 08, 2007, 04:48:35

Title: 1.1 patch
Post by: beechjetkid17 on September 08, 2007, 04:48:35

The patch is great. Just a few problems...
While I'm driving the hovercraft and im going full throttle, the gauges and instruments shake. When im walking around the hovercraft and im going full throttle, the mist from the water is inside the cabin and cockpit.
It is also very difficult to sink a ship. Ive tried going full throttle in the powerboat head on a static or AI ship and no damage or sinking at all...
Any comments??

Title: Re: 1.1 patch
Post by: Subwolf on September 08, 2007, 13:12:41

The "bleed through" is a serious bug and a real turn off. This is something Vstep should deal with fast. It's also reported on other ships like the PoR, where you can see the bow splash from inside the bridge.

Title: Re: 1.1 patch
Post by: [RWP]DJM on September 08, 2007, 13:15:44

These issues should be reported in this topic:

http://www.shipsim.com/ShipSimForum/index.php/topic,2139.0.html

This is still a Release Candidate and all issues should be reported for the Development team to assess exactly what needs addressing :)

Regards.

DJM.

Title: Re: 1.1 patch
Post by: Captain Best on December 09, 2007, 12:30:40

I did installed ship sim on my laptop.its was fine.
But i did installed ship sim 08 version 1.1 on shipsim.com it was many windows gone on titanic
+ the horn sound was gone. and engine sound was gone to. what are happing?

Title: Re: 1.1 patch
Post by: [RWP]DJM on December 09, 2007, 21:55:45

Hiya captain best :)

All technical problems must be reported in Technical Support:

http://www.shipsim.com/ShipSimForum/index.php/board,5.0.html

*Please Note - To access this area, you will need to register your licence key into your forum profile.  If you're not sure how to do this, please check the General FAQ's or PM a Moderator.

Please also use Search in Technical Support before posting a new topic :)

Regards.

DJM.