Ship Simulator
German forum => Ship Simulator Extremes => Allgemeines Forum => Topic started by: Kühne + Nagel on September 06, 2010, 16:08:18
-
Schönen guten Nachmittag,
sobald ich den Simulator starten möchte, seh ich erst das Logo von SSEx. Dahinter ist ein weiteres Fenster, das man leider nicht sehen kann (auch nicht verschieben)
Dieses Fenster wird "ChannelLinker.dll" genannt.
Schließe ich dieses, entsteht daraus ein "MeshSaver.dll"
Wenn ich das ebenfalls schließe, taucht das Fenster "Quest3DError" auf. In dem steht:
A channel that is needed for this project was not found in the installation path : BC696ABD-E265-4BAE-94AB-9C613AAAE5D0
Gruß,
K&N
-
Hallo Kühne + Nagel!
Ist etwas viel zu lesen, aber hier:
http://80.95.161.114/shipsim/forum/index.php/topic,20656.0.html
steht die richtige Lösung drin.
Viel Erfolg!
PS.: Falls du den Link nicht öffnen kannst, registriere bitte erst SSE in deinem Profil.
Gruß
Daniel
-
Vielen Dank, Daniel. ;)
Hatte den noch gar nicht im Profil registriert, daher konnte ich das vermutlich nicht sehen. *g*
Ich wünsch Dir (natürlich auch Euch) noch einen schönen Abend!
-
Hallo Kühne + Nagel!
Ist etwas viel zu lesen, aber hier:
http://80.95.161.114/shipsim/forum/index.php/topic,20656.0.html
steht die richtige Lösung drin.
Viel Erfolg!
PS.: Falls du den Link nicht öffnen kannst, registriere bitte erst SSE in deinem Profil.
Gruß
Daniel
is it possible to copy paste the content of the link you recommend please? I can not have access to this part of the forum and I think I have the same problem... 5 dll missing...
-
Hi Paysk,
please register your licence key in your forum profil. Hereafter you will have access to all boards, including english board and technical help board. :thumbs:
Best Regards
Sturmfahrt