Ship Simulator

English forum => Ship Simulator 2008 => Topic started by: njadve on August 25, 2007, 18:06:39

Title: Problems with a mission...
Post by: njadve on August 25, 2007, 18:06:39

I`m working with the spareparts-mission with the Sherpa-boat. I think it`s the first mission with that boat, and it`s in Marseilles. The problem is that I can`t get to check that third mooringicon, and which way am I supposed to moor? Here are some screenshots...

Am I supposed to moor this way?

(http://bildr.no/thumb/98205.jpeg) (http://bildr.no/view/98205)

Title: Re: Problems with a mission...
Post by: Shipaddict on August 25, 2007, 18:09:05

Nah, other way, then reverse a bit for the containers. ;)

Shipaddict :)

Title: Re: Problems with a mission...
Post by: Captain Spencer on August 25, 2007, 18:10:27

Hi njadve,

The problem you are having is because you have not connected the 3rd mooring line to the 3rd mooring post on the harbour.

Instead of mooring the vessel stern-on try mooring her on her side, this way you can connect all 3 mooring lines. I must agree it is a little tricky but you will get there  ;)

Title: Re: Problems with a mission...
Post by: groennegaard on August 25, 2007, 18:12:31

Hi njadve! :)

I think that I can help you with this one. You are supposed to moor on the other quay - at a right angle to the containership. You should use the bollards on that quay instead.

Regards
groennegaard

Title: Re: Problems with a mission...
Post by: njadve on August 25, 2007, 18:47:17

Ok, so it´s the bouy out and the stern in against the quay?

Title: Re: Problems with a mission...
Post by: groennegaard on August 25, 2007, 18:52:45

Moor it like this...  ;)

Title: Re: Problems with a mission...
Post by: njadve on August 25, 2007, 19:04:09

Thanks for quick response! Love that...

Edit:
Now I got it all under control, i just finished the mission. Not proud of my time, 1:02. Don`t worry, I haven`t done it all-in-one...

Title: Spare parts Marseille
Post by: elsix on January 06, 2008, 20:43:09

Hi folkes. I have a strange fenomenon with the standard delivered mission Spare Parts Marseille. I'v seen that in the forum already someone had a problem with this mission and added some photos.
My problem with this mission is that at the first deliverpoint there is a ship what not supposed to be there (see picture). I can moor the ship but can not stay close into the circle for completion.

How can I get this standard mission without this "ghost" ship? Are there more Marseille visitors with this strange situation?

Title: Re: Problems with a mission...
Post by: mvsmith on January 07, 2008, 16:13:04

Hi elsix,
If I remember correctly, that ship was gone in v1.1. Are you still running the original 1.0?
Marty

Title: Re: Problems with a mission...
Post by: elsix on January 07, 2008, 18:39:01

Hi. I have gone through version 1.0 till the latest version 1.3. I don't think it's good to try to load an earlier version because of one mission.