Ship Simulator

English forum => Ship Simulator 2008 => General discussions => Topic started by: scand on November 29, 2008, 04:28:50

Title: Bungsier 2
Post by: scand on November 29, 2008, 04:28:50

Is there a manual on the operation?  How does one slow it down?
Thanks!

Alex

Title: Re: Bungsier 2
Post by: Mad_Fred on November 29, 2008, 05:57:59

Hello Alex,

This topic might be helpful perhaps.

http://www.shipsim.com/ShipSimForum/index.php/topic,8823.0.html

Regards,
Fred

Title: Re: Bungsier 2
Post by: scand on November 29, 2008, 06:54:55

Thanks, Fred

Cheers
Alex

Title: Re: Bungsier 2
Post by: scand on November 29, 2008, 07:18:52

Fred,
I read all the references but nothing about the problem. I have no problem with NH criuse ship which is what they are mostly about. My problem is how do you slow down B2. I did it once using the thruttles in an unusal manner, either full throtttle to full RPM's than neutral until they drop and then full reverse

Or NEUTRAL  FULL THROTLE until RPM'S build up then a FULL REVERSE! If that works, no place for it as as a Harbor Tug!  It steers fine no problems!

Cheers

Alex

Title: Re: Bungsier 2
Post by: mvsmith on November 29, 2008, 09:05:44

Hi Alex,
As I recall, the screws on the Bug do not reverse rotation. You need turn them 180 degrees in azimuth.
Marty

Title: Re: Bungsier 2
Post by: scand on November 29, 2008, 19:02:20

Marty,
Thanks! I will try that.

Cheers!

Alex

Title: Re: Bungsier 2
Post by: scand on November 29, 2008, 21:20:36

Marty,

I tried that first from within the Wheelhouse. However, the probelm was the conflict
with the background and could not see the rudder settings went ouside which was perfect and all went well.
The mission was JUMBO JAVLIN HARBOR DUTY was O.K but the creator had his directions messed up to the next waypoint after unloading the canister.

Thanks again, Marty

Alex