Ship Simulator
English forum => Ship Simulator 2008 => General discussions => Topic started by: dustytrails on October 11, 2008, 04:46:28
-
how do you save mission/s in the editor. when i just completed a missioin or a map i go to save,and it tells me all it needs is title/description etc,etc and will save.
-
Hi dustytrails,
Welcome to the forum. Most of what you need to know to use the mission editor, and to save your missions, is covered in the Mission Editor Tutorial, which you can download from here:
http://www.shipsim.com/ShipSimForum/index.php/topic,2886.0.html (http://www.shipsim.com/ShipSimForum/index.php/topic,2886.0.html)
Specific to your question: You need to specify a title and a starting player vessel in the [Mission] panel.
You must put at least one letter in the Description: box.
Then click File in the upper left corner of the screen, and click Save mission in the drop-down list.
Type your user name—dustytrails—into the box, and then click the Save button.
Do not click the Upload mission unless you have a complete mission that you wish to submit to the CMMs for approval. It is not necessary to upload a mission in order to play it.
If you have any further questions, you can send me a PM.
Good luck,
Marty
-
Further to Marty's splendid advice, adding your name and a mission title is probably fairly obvious, but having done that, people sometimes report that they still can't save the mission because they get the same message from the game.
Go to the Waypoint section (click the "flag" icon, marked 1 in the image below)
Then click on the vessel that is to be the main "player" vessel (example marked "2" in the image below).
Then click the "Set as start" button (marked "3" in the image below).
Make sure that you have a description in the "Description box (marked "4" in the image below).
Then just enter your name in the box when you save the mission.
-
:Dthanks i now have a well i'm yet to play but your advice worked thanks ;D
-
a couple of vessels in ship sim 2008 that just plain too crazy control and they would be "bugsie 2" tug boat, and the car ferries oh and the ocean star all use the new hull thrusters.
-
a couple of vessels in ship sim 2008 that just plain too crazy control and they would be "bugsie 2" tug boat, and the car ferries oh and the ocean star all use the new hull thrusters.
Practice makes perfect :)
On the Ocean Star Controls, the little white arrows on the controller is the way the prop is going to push the water. For example, if the white arrows are facing left, the water is pushed left, turning the ship left.
-
You can download INFO.PDF from the same place you get the ME tutorial. It has directions for operating the container crane and some other objects.
A very simple way to operate Ocean Star is in this post:
http://www.shipsim.com/ShipSimForum/index.php/topic,9012.msg104399.html#msg104399 (http://www.shipsim.com/ShipSimForum/index.php/topic,9012.msg104399.html#msg104399)
-
Hi dustytrails,
As I said in my previous post, you must not click the File > Upload mission button unless you are prepared to submit a tested mission that meets the requirements of the guidelines posted at the top of the Missions section of this forum.
Your recent submission does not meet that requirement.
Marty